WPA3 via Unifi APs

johnpoz

my lawn robot mower

Dude you got any video's of it doing its thing while you sit back and watch with a beer! Would love that...

How well does it work.. I have toyed around with maybe getting one of those ;)

noplan

i m usin a landroid worx (with cut to edge) with the anti collison system, see pic (so that dog and the droid can play catch (spoiler: dog wins by tappin on the emergency button, pretty annoying for me cuz the droid cant be startet with the app after stopped by emergency)

runs on 2,4Ghz, i used some old unifi outdoor (traded for a bottle of Kona Big Wave beer each)
my feeling, the better the wifi coverage is the less problems if there were any. rain sensor is included in this model, and the spots the droid cant get to (radius to small) i got covered with some plants ;)

it works pretty awesome, and the best thing is u only need one line of wire the droid uses the wire to get back home if his shift ends or he needs to recharge, this and cut to edge and maybe the cool look with the ACS was my goto for it

if i really need to voice command it with google .... hmmmm dont know yet.

lookin for some pictures
br NP

johnpoz

That does look pretty slick!

But at that cost.. Take over 3 years to pay back the cost of just having the landscaping company do it ;)

Would be fun to play with though..

noplan

@johnpoz

yes i got u on this, i never ever calculated and will compare against wage for the landscaping guys.

but i love it commin home, not concerning what the garden looks like,
fire up the webber grill and gettin my steak or beer n burgers, or hang out with whoever comes around ;) i just bougth myself free time, yes i guess that's it.

johnpoz

I have company just cut the lawn for many many years.. Yeah your time is priceless if you ask me ;)

When first got the house - loved to cut the grass.. Grab a beer, or 2 or 3.. self powered mower so not a lot of effort - just guiding it a bout. Then edging - get some sun.. Then the boys got bigger and had them do it.. But would have to always go over what they missed, and edge.. So really didn't save much time..

And had to pay them.. F'ing wife - isn't the bed they sleep in, the food on the table pay enough for them <hahah>.. But when I got the lawn company to do it - was cheaper than paying the boys to do it. And didn't have to pay for gas for the mower, didn't have to spend time edging..

It was a win win for sure just paying to get it done. But now with toys like that - I miss out on playing with such a cool toy! hehehehe

But the current economics of switching to doing it myself (with a robot) vs just paying the lawn company who's cost has been really stable for many years.. No way I could get that through the budget committee (wife) on that sort of ROI ;)

noplan

@johnpoz

Oh yes I feel ya!

Main problem I see the more area the mower has to cover the more expensive this droids get,
I got my mom 2 of them and still saved money

She s happy with Duffy & Buggs but more important I don't have to to it if she s not around ... To earn the son of the month award ;)

But to get the fire and forget version of cuttin the grass there were some hours of blood sweat n tears and no this was not fun cuz beloved wife would not allow to cut trees ore m move plants....

A Former User

@johnpoz Hi John. How's 6.1.51? Looks like a mixed bag from the Ubiquiti Forum. Any big things that standout?

johnpoz

For what I am using it for - it works, I got wpa3 enabled..

I don't like the new UI.. Its a freaking ad for dream machine.. WTF? If you don't have a USG you see this nonsense.

I guess could hide that element with the browser.. But come on.. And that windows 10 in the corner - ok I am connected with windows 10 to the gui, but that is not what the controller is running on, etc.

And really don't like how they have changed the settings about in the new ui.. So I just turn off the new ui stuff and use the classic..

How about show some info about the controller on the dashboard - what its running on, cpu/mem/etc..

The dashboard could be really nice if they allowed you to put the info you want on there, that was actually useful.. You can ad some widgets and stuff in the classic setting.. But much of the data is really misleading - and they have issues for sure with metrics. I chased some details on what the F does this mean..

High latency means what? I haven't really found a good answer..

I pretty much use it to make setting changes, and quick simple way to see what devices are connected to what AP, at what connection rates, etc. etc.. But now that they have wap3 enabled - they don't show you if client is using that? I would think this would be great info to include.. Hey did my IOT device connect using wpa3, or maybe I should think about upgrading them.. Or maybe move them to a different ssid that is only wpa2, etc. etc.

But overall it works - I can make the settings I need to make, I can get decent amount of info about clients PHY and which AP.. And see some details of how the AP are running from cpu/mem - what is breakdown of util for different channels, etc.

But it for sure is lacking in areas - why I always run the latest beta.. Hoping it improves ;)

A Former User

@johnpoz Thanks John.

I agree that the dashboard metrics are of limited usefulness, WiFi experience and the stuff in the two boxes on the left. I don't like the big ad but I suppose I should expect such crap from Ubiquiti.

I'll backup my 5.0.x config and do the update. Can always set it to use the "classic" UI. I see that with 5.1.x the New settings and UI are now glued together. Oh well, I don't keep that open in a browser tab so no biggie.

I can always do a dpkg -P unifi and restore the 5.0.x if it all goes south.

I had turned off my Unifi stuff a couple of weeks ago and put up my Ruckus APs. I've now taken them down so I can take them to our new place next week and put the Unifi stuff back up.

I currently have 3 SSIDs. One for "home" devices that use enterprise and Radius assigned vlan. One for "other" devices that use psk and MAC based Radius assigned vlan. And my guest network. The only device on my "home" network that can't use WPA3 is a HD (gen4) Apple TV. I'll just put that on the "other", psk, network. So I'll be able to use WPA3-Enterprise on that home network and just leave´the others alone.

I suppose I could just go WPA3/WPA2 psk and get rid of that enterprise network and be down to two SSIDs... It's good to have choices.

Sorry if this is a bit disjointed. Slept in late and only one cup of coffee.

John

johnpoz

I have not been able to get wpa3-enterprise to show up on device - iphone.. Which I know supports wpa3, since it works via wpa3-psk.

From what I can tell really wpa3 enterprise doesn't get you much unless you use 192 encryption.. But can not enable that via my AP Pro, Lite and LR - seems that is only supported on gen 3 AP.. so you would need HD APs

I tried setting freerad to cipher AES256-SHA256 since I believe you need to be using min AES128 for wpa3 enterprise..

I set wpa3 enabled and required PMF - but iphone is still just showing wpa2 enterprise..

Yeah the only 3 devices on eap-tls network are 2 iphones an an ipad.. and laptop - but the laptop prob doesn't support wpa3 anyway. And right now its my work laptop and I just have it wired since started working from home full time.

wpa2-ent is more then secure enough anyway.. But it would be nice if could get it doing wpa3-ent.. I guess I could just move to wpa3-personal, and forget all the eap-tls and freerad stuff..

I for sure need to do some research on the difference between wpa2-ent and wpa3-personal.. I am really not finding all that much from a security point of view, especially if your using PMF required on your wpa2-ent setup..

edit: BTW this and that little issue with the freerad package and users gets me to thinking I need to get eapol_test running on something. But I really don't have anything that supports wpa3 I could run it on anyway.. So it wouldn't help me with this little issue - but it would be simple way to figure out the ciphers being used.. I changed the cipher_list from default to HIGH, and then even just called out AES256-SHA256 by editing freeradius.inc - since couldn't find a way to edit that in the freerad gui..

A Former User

@johnpoz OK, thanks. Saved me some time and head scratching. All of my "home" devices are iPhones, iPads and MacBooks.

I have two nanoHDs and a AC-Pro, so that one generation 2 AP would be an issue.

Maybe I'll just do nothing. ;) More coffee required.

At some point I'd love to pick your brain about using a L2/L3 switch and the topology. That's for another day after I've gone to school on the subject so as to not look like a dummy ;)

Thanks again!

johnpoz

Yeah sure - happy to help... Take a look at my edit if you missed it.. Do you have eapol_test running on anything. I guess you have to compile it yourself from wpasupplicant.. I wasn't able to find a binary.. I can sure fire it up on VM I would think..

Wonder if that would be something useful to add when you add the freerad package, you can test basic connectivity with radtest, but you can not really test eap-tls with that.

A Former User

@johnpoz I don't.

I also haven't gone through my radius conf in any serious way. I think that is a good activity for me today. Maybe I should put up a freerad server in a VM and go through it all by hand, take the GUI out of it and actually learn the concepts and config. Make a setting, google google google. Rinse and Repeat... ;)

johnpoz

Same here ;) It just worked really out of the box.. clicky clicky ;)

Guess that is part of the reason I didn't notice that you really should have to have a user created - hehehe but I didn't and eap-tls was working..

If no user to match the CN - wtf was it checking the user against ;) doh!

A Former User

I guess I'll start at the basics. Unwind any misconceptions before moving forward.

https://networkradius.com/doc/FreeRADIUS%20Technical%20Guide.pdf

chpalmer

Just updated my UAP-AC-Pro's to 5.53.1.12737 which showed up available this morning.

Just FYI for those looking. I assume one would need this for WPA3 capabilities..

johnpoz

The previous firmware supported it, 5.53.1 was just putting them all on the same version again for the different gens of their AP.

mcury

There was a bug in the previous version..
Some printers were not connecting with WPA2/WPA3 transitional - PMF optional..

Now it's fixed.. So you can have WPA2 only devices connected to a WPA3 BSSID without problems now.. At least nanoHD.. I guess this release is going to be an official release

mcury

BTW, I finally solved the wrong date/time in the controller.

Thanks to an user in the Ubnt forum, found out that the controller is not using the system time, it's using the Java time, which is outdated..

In case you are facing this problem in the controller, follows below how to fix:

Update JAVA TZ time
Java SE Timezone Updater 2.3.2

https://www.oracle.com/java/technologies/javase-tzupdater-downloads.html

java -jar tzupdater.jar --version
sudo systemctl stop unifi.service
sudo java -jar tzupdater.jar -l
java -jar tzupdater.jar --version
sudo systemctl start unifi.service

occamsrazor

Did you manage to get WPA3 Personal working with a NanoHD or FlexHD? I just updated my controller to 6.1.54 and am struggling to get it working with a Macbook. I tried enabling it but the Macbook didn't seem to make a WPA3 connection. I read this thread which was a bit over my head, but the impression I got is that with MTK models like NanoHD/FlexHD WPA3 may not be working???

https://community.ui.com/questions/802-11r-Fast-BSS-Transition-and-802-11v-BSS-Transition-Management-Frame-on-WPA3-Supported-Matrix/de07c88c-7b9f-43ab-9c5b-e99c0f7756a0

BTW I figure you must know but just in case any reading this doesn't.... re: seeing if clients are using WPA2/WPA3.... on Mac you can just option-click the WiFi menubar icon and it'll tell you all the connection info.