Random Crashes
-
I have had 3 or 4 random crashes today an I am not sure why any help would be much appreciated. I attched the crash logtextdump.tar.0
-
@4maz-0
check with memtest if the ram is ok and do an fsck
https://docs.netgate.com/pfsense/en/latest/troubleshooting/installation.html#other-hardware-issues
https://docs.netgate.com/pfsense/en/latest/troubleshooting/filesystem-check.html -
Have they all looked the same as that?
Backtrace:
db:0:kdb.enter.default> bt Tracing pid 346 tid 100213 td 0xfffff80007e84000 kdb_enter() at kdb_enter+0x3b/frame 0xfffffe011da68420 vpanic() at vpanic+0x19b/frame 0xfffffe011da68480 panic() at panic+0x43/frame 0xfffffe011da684e0 trap_pfault() at trap_pfault/frame 0xfffffe011da68530 trap_pfault() at trap_pfault+0x49/frame 0xfffffe011da68590 trap() at trap+0x29d/frame 0xfffffe011da686a0 calltrap() at calltrap+0x8/frame 0xfffffe011da686a0 --- trap 0xc, rip = 0xffffffff8125815e, rsp = 0xfffffe011da68770, rbp = 0xfffffe011da68770 --- copyout() at copyout+0x3e/frame 0xfffffe011da68770 uiomove_faultflag() at uiomove_faultflag+0xf4/frame 0xfffffe011da687b0 pipe_read() at pipe_read+0x203/frame 0xfffffe011da68820 dofileread() at dofileread+0xba/frame 0xfffffe011da68860 kern_readv() at kern_readv+0x68/frame 0xfffffe011da688b0 sys_read() at sys_read+0x84/frame 0xfffffe011da68900 amd64_syscall() at amd64_syscall+0xa86/frame 0xfffffe011da68a30 fast_syscall_common() at fast_syscall_common+0x101/frame 0xfffffe011da68a30 --- syscall (3, FreeBSD ELF64, sys_read), rip = 0x80096af4a, rsp = 0x7fffffffe728, rbp = 0x7fffffffe740 ---
Panic:
Fatal trap 12: page fault while in kernel mode cpuid = 3; apic id = 13 fault virtual address = 0x800e2b000 fault code = supervisor write data, page not present instruction pointer = 0x20:0xffffffff8125815e stack pointer = 0x28:0xfffffe011da68770 frame pointer = 0x28:0xfffffe011da68770 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 346 (logger) trap number = 12 panic: page fault cpuid = 3 KDB: enter: panic
If they are different each time then, yeah, probably hardware.
Steve
-
@stephenw10 The past two have been the same. Im going to try different ram.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.