Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    How to get pfSense WAN to accept VLAN 0

    Scheduled Pinned Locked Moved
    General pfSense Questions
    25
    414
    168.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      cucu007 @stephenw10
      last edited by

      @stephenw10 I tried running the latest 04/03 snapshot for 2.7 and it doesnt seem to work either, had no choice but to rollback to 2.5.2 to get my internet up and running, it was a bad weekend to say the least getting this VLAN 0 issue sorted.

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Hmm, the fix for the known issue in e1000 should now be in 2.7 snapshots:
        https://github.com/pfsense/FreeBSD-src/commit/9c762cc125c0c2dae9fbf49cc526bb97c14b54a4

        If you're sure you were running a snap with that in that might not be the issue after all.

        Try running a pcap to see the tagged traffic.

        Steve

        C 1 Reply Last reply Reply Quote 0
        • C
          cucu007 @stephenw10
          last edited by

          @stephenw10 I was running the latest development SS as of Saturday and it didnt work. So I opted to rollback to 2.5.2 and apply the VLAN script fix, so far is working. Do you happen to now if the script will soon be modify to accommodate release 2.6, I like to stay ahead rather than behind :-)

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            The script itself should be fine in 2.6 or 2.7. The issue is the e1000 driver which incorrectly handles VLAN0 from what I can see.

            To be clear you applied the script in 2.7 and it failed? Did it show any errors?

            Steve

            C 1 Reply Last reply Reply Quote 0
            • C
              cucu007 @stephenw10
              last edited by

              @stephenw10 it just didnt work, I give up on it, didnt even check the logs.

              I am on 2.5.2 and is working, but my downloads is now slow. I am using frontier fiber. Did you get the script working on 2.6?

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                I personally don't use it. My ISP doesn't require priority tagging.

                The script works fine in 2.6 as long as you don't have an Intel e1000 NIC as I understand it.

                Steve

                1 Reply Last reply Reply Quote 0
                • c45p32C
                  c45p32
                  last edited by

                  I can confirm that with fix https://github.com/MonkWho/pfatt/issues/67#issuecomment-1043358822 on 2.6.0 works perfect. I haven't had any issues. My backup router has em drivers and I haven't had time to test that out yet on 2.7.0.

                  C 2 Replies Last reply Reply Quote 1
                  • C
                    cucu007 @c45p32
                    last edited by

                    @c45p32 said in How to get pfSense WAN to accept VLAN 0:

                    I can confirm that with fix https://github.com/MonkWho/pfatt/issues/67#issuecomment-1043358822 on 2.6.0 works perfect. I haven't had any issues. My backup router has em drivers and I haven't had time to test that out yet on 2.7.0.

                    I am planning to do some testing this weekend with 2.6.0. My internet was down for two days, so I opted to bring back my old router running openWRT and so far is working flawless, but if at all possible I would like to go back to pfSence since is my favorite!

                    Any ideas of what the 2.7.0 roadmap looks like in terms of release? Any potential tentatrrive dates?

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by stephenw10

                      No, there's no schedule for a 2.7 release yet.

                      22.05 is targeted at May obviously. That also contains the same fix. Assuming that fixes it.

                      C 1 Reply Last reply Reply Quote 0
                      • C
                        cucu007 @stephenw10
                        last edited by

                        I tried again today, doesnt work....I tried uploading both em and igb even when I only needed igb. I follow the instructions by the book in the post you reference, it looks like this remains broken as of 2.6.0. Going back to OpenWRT until this is sorted out correctly, will miss my pfSense box. ;-(

                        Please consider integrating this fix into the high priority list as it impact all AT&T and Frontier fiber customers. Thank you all for the good intentions. Shame on the ISPs for doing this vlan 0 tagging.

                        c45p32C 1 Reply Last reply Reply Quote 0
                        • C
                          cucu007 @c45p32
                          last edited by

                          @c45p32

                          Can you elaborate on how you getting this working, please provide the details as you follow.

                          I did follow the reference link you provided and follow the verbatin how-to but still not working on 2.6.0....I am using the igb driver, I even tried executing the pfat script from the shell and it keep giving me an error somehow on line 7. Anyways, any help would be apreciated as this is driving me nuts and had to put back in the closet my pfSense box.

                          1 Reply Last reply Reply Quote 0
                          • c45p32C
                            c45p32 @cucu007
                            last edited by

                            @cucu007

                            I use Frontier, all you should have to do is put the driver fix in first.
                            Next, put the VLAN 0 script in and create the shellcmd job I run my preshellcmd, make sure you are updating the script to your mac address for the WAN, and using the correct interface IE igb0.
                            Next just update your WAN interface to ngeth0. Reboot and you should be good to go. But make sure you release your IP.

                            C 1 Reply Last reply Reply Quote 0
                            • C
                              cucu007 @c45p32
                              last edited by

                              @c45p32 if at all possible, can you spare 5 minutes and put a quick how-to for those of us struggling in the integration with 2.6.0. I am using frontier fiber as well. Thank you in advance.

                              c45p32C 1 Reply Last reply Reply Quote 0
                              • c45p32C
                                c45p32 @cucu007
                                last edited by

                                @cucu007

                                1. Use this post (https://github.com/MonkWho/pfatt/issues/67#issuecomment-1043358822) to install the driver for igb0.
                                2. Reboot
                                3. Download vlan script from here: [vlanzero.sh.tar.gz] (https://forum.netgate.com/assets/uploads/files/1614644825333-vlanzero.sh.tar.gz) and unzip it.
                                4. Edit vlanzero.sh and change ONT_IF='xx0' to your WAN assignment, usually igb0. You can find this under Interfaces > Assignments
                                5. In the same file change ONT_ETHER_ADDR='xx:xx:xx:xx:xx:xx' to your mac address for your WAN. You can usually see this under Status > Interfaces Under the WAN interface heading. Save and close the file.
                                6. Goto Diagnostics > Command Prompt and Upload the vlanzero.sh file you just edited.
                                7. ssh into pfSense
                                8. type the following commands:
                                  mv /tmp/vlanzero.sh /root/vlanzero.sh
                                  chmod +x vlanzero.sh
                                  ./vlanzero.sh
                                9. Go to Interface > Assignments and change your WAN to ngeth0 click save and apply
                                10. Make sure you have the package shellcmd installed. Go to Services > Shellcmd
                                11. Click "Add" for Command put "/root/./vlanzero.sh" without quotes, shellcmd type set it to "earlyshellcmd", and then name it what ever you want. Save
                                12. Reboot and you should be working.

                                Note you need to either release your IP using the Frontier box, or just unplug your ONT for a few min. I usually just unplug easier.

                                C c45p32C 2 Replies Last reply Reply Quote 1
                                • C
                                  cucu007 @c45p32
                                  last edited by

                                  @c45p32 Let me try this once again, thank you for taking the time to do the write up. Will provide the update shortly.

                                  I will be trying this on 2.6.0 so you know.

                                  C 1 Reply Last reply Reply Quote 0
                                  • C
                                    cucu007 @cucu007
                                    last edited by

                                    @cucu007

                                    @cucu007 I just tried this remains broken on 2.6.0< i reset the ONT and reloaded 2.6.0 clean install....Follow ed the instructions regarding igb and em loaded modules. Follow the config.xml changes using early shell, still my IP is showing 0.0.0.0 in the pfSense end, I tried rebooting multiple times same effect, looks like this things remains broken on 2.6.0, hope someone can shine some light on this soon.

                                    kldstat -v | grep -i igb
                                    134 pci/igb

                                    Screenshots of my outcome.

                                    2022-04-09_22-44-43.png

                                    2022-04-09_22-44-02.png

                                    2022-04-09_22-43-13.png

                                    C 1 Reply Last reply Reply Quote 0
                                    • C
                                      cucu007 @cucu007
                                      last edited by

                                      @cucu007

                                      How do you guys get the igb and em driver to load, I tried putting it in the place where the post mentioned and no matter what I do the old driver/module remains in loading state, any clues....maybe this is the reason why is not working since it keep loading the old driver (stock). Please advise.

                                      1 Reply Last reply Reply Quote 0
                                      • C
                                        cucu007 @c45p32
                                        last edited by

                                        @c45p32 said in How to get pfSense WAN to accept VLAN 0:

                                        @stephenw10

                                        Ok, I went ahead and went cowboy and upgraded my main router (igb) and it worked. I put the fix in then upgraded to 2.6.0 worked, went to CE, and still worked all the way from 2.5.2.

                                        Do you have instructions on how to compile that driver for em? I tried and it couldn't find the kernel modules.

                                        Thank you again for all your help!!

                                        Wondering how you got the new kernel module to load, perhaps this is the issue I am having.

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          Is the alternative driver actually loading?

                                          Check the bootlog or sysctls. If you still see this it's not loaded:

                                          [22.05-DEVELOPMENT][admin@5100.stevew.lan]/root: sysctl dev.igb.0.iflib.driver_version
dev.igb.0.iflib.driver_version: 7.6.1-k

                                          Steve

                                          C 1 Reply Last reply Reply Quote 0
                                          • C
                                            cucu007 @stephenw10
                                            last edited by

                                            @stephenw10 said in How to get pfSense WAN to accept VLAN 0:

                                            Is the alternative driver actually loading?

                                            Check the bootlog or sysctls. If you still see this it's not loaded:

                                            [22.05-DEVELOPMENT][admin@5100.stevew.lan]/root: sysctl dev.igb.0.iflib.driver_version
dev.igb.0.iflib.driver_version: 7.6.1-k

                                            Steve

                                            Steve, it doesnt look like is lloading, no matter what I tried and this is a clean install of 2.6.0...see my output below:

                                            [2.6.0-RELEASE][admin@lgfw04022022.home.arpa]/root: sysctl dev.igb.0.iflib.driver_version
                                            dev.igb.0.iflib.driver_version: 7.6.1-k

                                            [2.6.0-RELEASE][admin@lgfw04022022.home.arpa]/boot/modules: ls -la
                                            total 303
                                            drwxr-xr-x 2 root wheel 6 Apr 10 04:04 .
                                            drwxr-xr-x 10 root wheel 65 Apr 10 05:36 ..
                                            -r-xr-xr-x 1 root wheel 106328 Jan 12 15:44 bwi_v3_ucode.ko
                                            -rw-r--r-- 1 root wheel 408896 Apr 10 04:04 if_em.ko
                                            -rw-r--r-- 1 root wheel 122690 Apr 10 04:04 if_igb.ko
                                            -rw-r--r-- 1 root wheel 88 Jan 31 20:32 linker.hints

                                            loader.conf loader.conf.d/ loader.conf.local
                                            [2.6.0-RELEASE][admin@lgfw04022022.home.arpa]/boot/modules: cat /boot/loader.conf.local
                                            if_em_load="YES"
                                            if_em_name="/boot/modules/if_em.ko"
                                            if_igb_load="YES"
                                            if_igb_name="/boot/modules/if_igb.ko"

                                            C 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post