HOWTO Static route on Lan interface with DUAL WAN
-
Subject is my question. :) Have ver 2 installed can go to routes and make static route for a wan interface bat do not have the option to make one for the Lan interface. Have got few different sub nets on LAN side and have to be able to route traffic back from PFSense. Pleas, any info would be apretiated.
-
Not sure if this is what you mean but you can add a gateway address on the rules of LAN interface, this will force traffic allowed by the rule through the WAN interface of your choice.
-
Thanks. What happen is that i have got more than one sub net on the lan interface side. When u give the lan interface an ip pfsense will default add route for traffic to your lan, however i have to somehow manually add the rout for second sub net ip range in routing table. This is what a can not find a place to do.
-
I did see this asked before on this forum but don't recall if and how it can be done.
Depending on the LAN subnets you might avoid the routing problem by adjusting the mask on the LAN interface (supernet).