Upgrade to 2.5.0 results in WAN issues
-
Coming from 2.4.5p1, I decided to give the latest 2.5.0 snapshot (20210214) a try on my Netgate SG-2440. The upgrade completed nominally and all was well until 5 minutes after boot, the WAN reports that it has 100% packet loss and I lose internet. I have Verizon FiOS residential which uses DHCP. If I renew the DHCP lease, internet is restored for 5 minutes again after which it fails again.
I put another DD-WRT device between FiOS and my pfsense unit and it connects with FiOS just fine. An the pfsense is rock solid with the DD-WRT LAN as the pfsense WAN input.
Any thoughts on what is different about 2.5.0 that would cause this working configuration with FiOS to sudden have issues?
Update: I'm seeing the same issue on my backup WAN with a T-Mobile Cellular modem. The difference is this one heals itself and the timing is random. I never say this before the upgrade.
-
@jeffv I have a similar issue after upgrade to 2.5 today.
Wan says offline packetloss 100%
Also using BT FTTP WAN DHCP.