pfSense Plus and SG-3100

mcury

@teamits found another way to trigger it.. not sure if it's the same problem, but try:

ssh to pfsense and type:
gpioctl 2 0

stephenw10

@mcury said in pfSense Plus and SG-3100:

gpioctl 2 0

Hmm, interesting. Not the same issue though, php is not involved there:

Mar 14 13:52:52 	kernel 		pid 32606 (gpioctl), jid 0, uid 0: exited on signal 11 (core dumped)

Likely that's because the first GPIO device cannot be set like that. You can set a PWM duty there. It should not segfault though.

Steve

mcury

Any news about this issue?

#11466 latest update on 03/11/21, nobody is assigned to that task..

Searched for this PHP bug in https://bugs.php.net/ and couldn't find anything about this PHP interpreter error for ARM 32 bits and/or Freebsd..

stephenw10

Nothing specific yet I'm afraid. We are looking at it though just no-one has been assigned in Redmine. Details will be on the bug report there as we confirm them.
We have a separate internal report we use until we have something useful to add publicly.

Steve

mcury

@stephenw10 Thanks Stephen.

I didn't know about the separate internal report.

bigchimpin

I can't believe I paid almost $500 for this router lol

mcury

There is one bug that the affected version is incorrect for the SG-3100 , #11473

Luketa

I continue with version 2.4.5_1 on the SG-3100
I saw that it came out of version 21.02.2, is it stable?

I plan to update this week from 2.4.5 to 21.02.2

NOCling

My SG-3100 runs nice with 21.02.2.

mcury

Same here, didn't try snort/suricata.
Running smoothly with pfblockerng-devel 3.0.0_16

NokkieF

@mcury still experiencing same kernel alerts here

Amarand

@luketa

There was a bug, during the standard upgrade from 2.4.5 to 21.02_2 (the hot fix), where the SG-3100 hung post-install with the triple-flashing-lights.

After connecting a serial console, and verifying no output, I power cycled the SG-3100, and it came back up fine, with the 21.02_2.

I upgraded from 21.02_2 to 21.02.2 (note the _ versus the .) yesterday, and it A) upgraded fine and B) has been running fine with no issues.

Please make sure you take a look at some of the persistent plugin related bugs associated with the 21.x line that are not present in the 2.4.5 code, to make sure you won't be impacted by these bugs, before you upgrade.

Edit: the SG-3100 comes with a serial cable, which you can connect up to a computer and run a serial terminal (like PuTTY or whatever), to watch the upgrade process. I'd recommend doing this, especially from 2.x to 21.x

mcury

@nokkief Can you share more details about your setup?
I've been testing for about 4 days, trying to crash the SG-3100 with high loads, and it seems to be pretty stable..

Are you using suricata/snort ?
Are you using pfblockerng-devel_3.0.0_16, and if so, what feeds?

NokkieF

@mcury
I am seeing this:

2021-04-22 19:30:04.062460+02:00 	kernel 	- 	pid 73327 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 19:15:03.967524+02:00 	kernel 	- 	pid 27459 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 19:00:03.889566+02:00 	kernel 	- 	pid 8141 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 18:45:04.012638+02:00 	kernel 	- 	pid 56654 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 18:30:03.934697+02:00 	kernel 	- 	pid 48931 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 18:15:04.057781+02:00 	kernel 	- 	pid 94150 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 18:02:36.622513+02:00 	php 	25838 	[pfBlockerNG] No changes to Firewall rules, skipping Filter Reload
2021-04-22 18:00:04.180824+02:00 	kernel 	- 	pid 25987 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 18:00:01.142905+02:00 	php 	25838 	[pfBlockerNG] Starting cron process.
2021-04-22 17:45:04.303922+02:00 	kernel 	- 	pid 79696 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped) ```
code_text

I am running the following packages
acme security 0.6.9_3
haproxy net 0.61_1
pfBlockerNG-devel net 3.0.0_16

Not sure how I can easily retrieve the lists I am using, but I am using quite a few.

mcury

@nokkief Those are the same errors I was getting before.
I'm suspecting that the number of feeds is causing the crash.

I would like to suggest you to remove pfblockerng-devel completely and reinstall.
There is an option "keep settings" in pfblocker that you shouldn't tick before package removal.

After that, save the pfsense xml configuration, edit it and confirm that there isn't a single entry for pfblockerng...
I'm saying this because the 'old feeds' from previous versions remained in my XML configuration.

After removing all the pfblockerng entries in xml, restore it, then reinstall pfblockerng.

I did add dnsbl_easylists feed after the wizard, for me it is enough.
You should add one feed at a time to test..

NokkieF

Thanks, I will give it a go later. See if I can make them go away. It might also be haproxy, but it might be worth a shot trying

stephenw10

Yes, this looks like it's almost certainly php choking on a large list parsing function for as yet unknown reasons. Loading fewer or smaller lists in pfBlocker will likely avoid it.

NokkieF

@mcury the pfsense config you refer to the one in /conf?

NokkieF

I reinstalled the pfBlocker. I though I cleaned it out pretty well, but it still picked up the PRI1 list (I do not remember this being automatic anyways). So far I do not see any issues in the logging. so it looks good so far. I will give an update later if I see any php errors.

mcury

@nokkief I saved the xml through the GUI settings:

@mcury the pfsense config you refer to the one in /conf?

Save the XML, edit it and search for pfblockerng

You will find a few of these:

			<config>
				<aliasname>ADs_Basic</aliasname>
				<description><![CDATA[ADs Basic - Collection of ADvertisement Domain Feeds.]]></description>
				<row>
					<format>auto</format>
					<state><![CDATA[Enabled]]></state>
					<url>https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts</url>
					<header>StevenBlack_ADs</header>
				</row>
				<action>unbound</action>
				<cron>EveryDay</cron>
				<logging>enabled</logging>
				<order>default</order>
				<dow>1</dow>
			</config>
			<config>
				<aliasname>EasyList</aliasname>
				<description><![CDATA[EasyList Feeds - Utilizing only the domains which are listed to be blocked in full.]]></description>
				<action>unbound</action>
				<cron>EveryDay</cron>
				<dow>1</dow>
				<sort>sort</sort>
				<logging>enabled</logging>
				<order>default</order>
				<filter_alexa></filter_alexa>
				<custom></custom>
				<row>
					<format>auto</format>
					<state><![CDATA[Enabled]]></state>
					<url>https://easylist-downloads.adblockplus.org/easylist_noelemhide.txt</url>
					<header>EasyList</header>
				</row>
				<row>
					<format>auto</format>
					<state><![CDATA[Enabled]]></state>
					<url>https://easylist-downloads.adblockplus.org/easylistportuguese.txt</url>
					<header>EasyList_Portuguese</header>
				</row>
				<row>
					<format>auto</format>
					<state><![CDATA[Enabled]]></state>
					<url>https://easylist.to/easylist/easyprivacy.txt</url>
					<header>EasyPrivacy</header>
				</row>
			</config>
		</pfblockerngdnsbl>

Remove the pfblockernng package without the `keep settings' option.
Remove everything related to pfblockerng from the XML file, and then restore the config to the firewall through the GUI, this will clean all the feeds from the config.

Note: It will take a few minutes to complete, your internet will be down during this period.

Once the config restore/boot completes, install pfblockerng again, run the wizard, and add a few feeds you like, but don't add too many feeds..

I reinstalled the pfBlocker. I though I cleaned it out pretty well, but it still picked up the PRI1 list

PRI1 is OK to have, it's installed during the wizard in 3.0.0_16

I'm using the following lists: (I added Easylist manually, it isn't there by default).