How to set up routing between LAN and OPT subnets
-
Hopefully this is the right sub-forum.
If I have a LAN subnet on the LAN port of my SG-1100 (192.168.1.0/24) and another on the OPT port (192.168.4.0/24), what kind of routing or firewalling would I have to set up, so the two LAN subnets can freely communicate with each other? I am especially concerned with the routing of mDNS (Apple Rendezvous) traffic.
For OPT ⇆ LAN connectivity, what kind of
- gateway
- routing
- firewall rule
do I have to set up?
-
It turns out that I have to set up a bridge in Interfaces→Bridges. For mDNS bridging I also set up Avahi between the different subnets.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.