Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Access site to site networks through remote access setup

    Scheduled Pinned Locked Moved OpenVPN
    3 Posts 2 Posters 503 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • B
      Bambos
      last edited by

      Hello everyone.

      I have working setups of:
      Firewall A
      Physical networks:
      192.168.1.0/24
      192.168.8.0/24
      192.168.16.0/24

      Site to site between firewall A 192.168.16.0 & a firewall B: 192.168.27.0 through site to site shared key setup (working both directions)

      Remote access vpn (road warrior) on firewall A, added all the physical networks for access, all working (1,8,16 Lans). Then i also added the 27 network which is through a site to site VPN tunnel, and cant get route to it with remote access VPN, even i can see it in route print. Firewall A can communnicate normally with firewall B from the physical networks 16, but not from road warrior VPN, which road warrior VPN can access network 16.

      Is it firewall A setup issue not giving the route, or windows metric issue ? What i can check?

      DerelictD 1 Reply Last reply Reply Quote 0
      • DerelictD
        Derelict LAYER 8 Netgate @Bambos
        last edited by

        @bambos Did you route the Remote Access tunnel network over the VPN on firewall B so traffic flows the other way?

        Do the firewall rules on both OpenVPN tabs on both firewalls pass the necessary traffic?

        Chattanooga, Tennessee, USA
        A comprehensive network diagram is worth 10,000 words and 15 conference calls.
        DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
        Do Not Chat For Help! NO_WAN_EGRESS(TM)

        B 1 Reply Last reply Reply Quote 0
        • B
          Bambos @Derelict
          last edited by

          @derelict said in Access site to site networks through remote access setup:

          @bambos Did you route the Remote Access tunnel network over the VPN on firewall B so traffic flows the other way?

          Do the firewall rules on both OpenVPN tabs on both firewalls pass the necessary traffic?

          @Derelict actually your first comment was right on point.
          I have set on firewall B, on site to site settings, in the field of remote networks, i have added the tunnel IP of road warrior VPN. Thank you very much for your help.

          I know you know, i just explain it here for future reference, maybe someone need it.

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.