Authenicated NTP

[JonathanLee]

@dobby_ I have the firewall serving all time now, I am going to attempt the authenticated stratum NTP servers, the only problem is I might not have the pool of 4-5 servers to do the offsets time math equations automatically anymore as the authenticated server comes with only key for access. Prior to the pool I noticed slight time jumps in the past during my breaks or quizes. Yes NTP is an older protocol and does have some bugs I have noticed. I only ever spotted the jumps with a manual clock, and yes it's not all of them. Again during a test, or quiz a jump of 15 mins is a huge amount of time, and something was causing this deleting time to rush the tests, only reason was to cause a stressful environment. Again, these are problems that the multi pool solved. Will authenticated servers come with a pool? That I hope to find out soon. My current pool and time is set up with the slowed earth leap second offsets that the scientific community has listed for use. I also hope that still works. I have very precise time. I flat don't like it messed with anymore. Precision is what makes the difference. Logs is what tracks unethical behavior so it can be reported. It's unethical to move time like that during someone's break and or during a quiz. I am waiting for my letter in the mail so I can learn about authenticated NTP it, I hope it comes with a pool also.

[JonathanLee]

@dobby_ the pools work very well as "NTP will only sync if a majority of the servers agree on the time. For best results you should configure between 3 and 5 servers (NTP support pages recommend at least 4 or 5), or a pool. If only one server is configured, it will be believed, and if 2 servers are configured and they disagree, neither will be believed." if 4 are used if one moves a large amount the other 3 have to agree if they don't, the time that is served never changes, if they are still off by a couple seconds between servers it balances them with an equation. It's a really good solution, as abuse is pointed to only one server so it doesn't effect the pool. You have to NAT NTP to the firewall for everything that wants time. I have it inverted anything that doesn't request my firewall for NTP gets NAT(ed) to it without knowing, that's when the abuse stopped forever. They now required 3 out of the 4 time servers to agree to on what is served. PfSense is amazing software when you get into it. NIST servers fixed everything for me with the jumps. I can't wait to test out authenticated services.

(I need my key to make it more secure)

(Pool Running and moving to stratum 1)

(Leap seconds running successfully)

(Netgate runs my clocks down to the nano second now)

[Dobby_]

@jonathanlee

Auth. NTP servers give you a bit more safe feeling, because they are knowing how many users are using that servers!
Its not like "tomorrow 15 million users" begin using that server and it is going down or responding slower, the delay is growing or the server is not any more responding.

I use a mix of more then one NTP and also want to let it grow. At first I use NTP servers pool over WAN they are
connected to or based on an atomic clock. Might be the
best in my eyes. I have a fallback line over LTE for a
second chance to get the time over the internet.
The LTE modem has also a GPS antenna connected
so I got one more time source.

The next way to set up was a miniCPIe GPS (only) card
inside of the pfSense and all is fine now.

• wired internet
• wireless internet
• gps only

May be that auth. NTP server will be an option on top of all, because they know then the amount of users exactly
and can set up another one if the responds time goes down or will be lower and not anymore so fast.

[JonathanLee]

@dobby_ in the early 2000s we use to have to set the DTE and DCE clock rates for the network routers to work correctly, if they had no clock rates set they would not function. Imagine something like a Ciena or Juniper backbone system today, how perfectly in time they have to be to support supernet city to city communications. Time is amazing stuff as it is time of use specific.

[LamaZ]

@jonathanlee said in Authenicated NTP:

@lamaz were you ever in the past having issues that's with time jumps 10-15 mins around noonish?

Thankfully I've never seen this behavior. It would have driven me mad as well when taking the OSCP exam and I was down to the wire.

I haven't been using multiple servers. Maybe I should I'll grow my list. There are only 4 servers that support authenticated NTP according to https://tf.nist.gov/tf-cgi/servers.cgi.

Nice touch ensuring that no local hosts are trying to skirt around your NTP. I do the same thing with both NTP and DNS. Local DNS requests get re-mapped to my pfSense DNS which then does it over TLS. I watch my WAN and ensure no traffic is going out on UDP port 53 :).

EDIT: I did it. Thanks @JonathanLee for the informative posts on NTP. I learned something new today.

[23.01-RELEASE][admin@your-sweet-pfsense-server-name]/root: ntpq -pc as
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
*ntp-g.nist.gov  .NIST.           1 u   62   64    3    5.755   +0.244   1.500
+ntp-c.colorado. .NIST.           1 u   65   64    3   44.843   +0.668   1.292
+ntp-wwv.nist.go .NIST.           1 u   64   64    3   45.135   -1.426   1.312
+ntp-b.nist.gov  .NIST.           1 u   66   64    3   42.373   -1.416   1.486

ind assid status  conf reach auth condition  last_event cnt
===========================================================
  1 30934  f61a   yes   yes   ok   sys.peer    sys_peer  1
  2 30935  f414   yes   yes   ok  candidate   reachable  1
  3 30936  f414   yes   yes   ok  candidate   reachable  1
  4 30937  f41a   yes   yes   ok  candidate    sys_peer  1

Full tinfoil hat.

-LamaZ

[LamaZ]

Folks,

In an effort to facilitate checking the status of authenticated NTP, I've added some columns to the NTP Status page to parse the output of ntpq -c associations as defined in the ntpq Command spec. Let me know what you folks think.

The last 3 columns have been added (AssocID, Status Word, Auth). I only added those 3 to the GUI, but I added the plumbing for the most of the fields in case someone wanted to display them as well.

Patch file provided if you want to try it out. It worked for me :)
status_ntpd.php.auth.patch

PS - I'm trying to unlock my Redline account to add this as full fledged feature request. Somehow I'm not getting the password reset email at the moment.

-LamaZ

[JonathanLee]

@lamaz I just got my official secure email from NIST and was given a key and a value, do I only use the value inside of pfsense, it seems to work correctly with that again I will need your patch to see if it authenticated correctly. COOL encrypted secure time!!

[JonathanLee]

@lamaz

I added my key however it is not using auth

With your patch so I can add my key number to use with key value now it works !!! Thanks

[JonathanLee]

@lamaz I am going to open a redmine ticket for you as this is missing the key value and redirect the ticket to this page so others can see this.

[JonathanLee]

@lamaz

Yeah!!!

[LamaZ]

Awesome! Warms my heart to see someone else getting value out of these patches and that they are working for others.

@jonathanlee said I am going to open a redmine ticket for you as this is missing the key value and redirect the ticket to this page so others can see this

Let me know how that goes. I tried many moons ago to get it added with no luck. Here is the last time I tried: https://redmine.pfsense.org/issues/8794

I'd follow up myself, but I somehow can't reset my redmine password. I'm guessing too many recent reset password attempts from my IP. The password apparently can't be too complex.

-LamaZ

[JonathanLee]

@lamaz that is from 2018 ?? Wow I added some notes in your older ticket just now.

[JonathanLee]

@lamaz thank you for the patches. I appreciate you.

If you wanted the leap second file this is the one I am using

https://www.ietf.org/timezones/data/leap-seconds.list

[LamaZ]

@jonathanlee Has it been that long?! Time flies.

[LamaZ]

@jonathanlee Just added the leap seconds to my setup. Thanks for the tip!

I like that I tried adding my comments to the file and it validated the hash. Put another it gave me an "signature mismatch" because something had changed. I went back and copy/pasted as-is and now have the leap seconds properly setup.

cat /var/log/ntpd.log | grep leap
Mar  3 19:02:51 pfSense ntpd[61552]: leapsecond file ('/var/db/leap-seconds'): signature mismatch
Mar  3 19:03:36 pfSense ntpd[75239]: leapsecond file ('/var/db/leap-seconds'): good hash signature
Mar  3 19:03:36 pfSense ntpd[75239]: leapsecond file ('/var/db/leap-seconds'): loaded, expire=2023-06-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37

-LamaZ

[DeLiver]

@jonathanlee Off topic, but how do you get Status/NTP to sort like you have shown? 2.6 CE to 22.01 and 23.01 Plus all act weirdly when trying to sort by columns, for me. Thanks.

[tman222]

@jonathanlee said in Authenicated NTP:

@johnpoz you can fax them also I just did, I want to test this, I have seen time jumps during cyber security classes in the past. 10-15 min jumps. Maybe this will fix it again with the use of my firewall I have not seen that in a while. Still I want to check it out. "Users who wish to use this service should send a letter to NIST using the US mail or FAX machine (e-mail is not acceptable)."

@JonathanLee - do they still require a static IP address or can a host name be given instead (in case the IP is dynamic)? Thanks in advance.

[JonathanLee]

@tman222 I was required to provide the IP address provided to me by my ISP.

[JonathanLee]

@deliver I installed the patch that is listed above. LamaZ provided it to us, I am very thankful for it. Use the 23.05 version

[JonathanLee]

@lamaz time flys haha as we talk about time servers