extra queue in fq_codel limiter

[farmerjohn]

I recently followed these instructions and bufferbloat score went from F to A.

I then added two queues - vpn experiment - one under each WAN limiter, but then deleted each of them. Limiter information now shows one extra queue. How can I remove this extra queue?

code_text
Limiter Information
Limiters:
00001:  68.000 Mbit/s    0 ms burst 0 
q131073  50 sl. 0 flows (1 buckets) sched 65537 weight 0 lmax 0 pri 0 droptail
 sched 65537 type FIFO flags 0x0 0 buckets 0 active
00002: 100.000 Mbit/s    0 ms burst 0 
q131074   1 sl. 0 flows (1 buckets) sched 65538 weight 0 lmax 0 pri 0 droptail
 sched 65538 type FIFO flags 0x0 0 buckets 0 active


Schedulers:
00001:  68.000 Mbit/s    0 ms burst 0 
q65537  50 sl. 0 flows (1 buckets) sched 1 weight 0 lmax 0 pri 0 droptail
 sched 1 type FQ_CODEL flags 0x0 0 buckets 1 active
 FQ_CODEL target 5ms interval 100ms quantum 300 limit 10240 flows 20480 NoECN
   Children flowsets: 1 
BKT Prot ___Source IP/port____ ____Dest. IP/port____ Tot_pkt/bytes Pkt/Byte Drp
  0 ip           0.0.0.0/0             0.0.0.0/0       37     4588  0    0   0
00002: 100.000 Mbit/s    0 ms burst 0 
q65538  50 sl. 0 flows (1 buckets) sched 2 weight 0 lmax 0 pri 0 droptail
 sched 2 type FQ_CODEL flags 0x0 0 buckets 1 active
 FQ_CODEL target 5ms interval 100ms quantum 300 limit 10240 flows 20480 NoECN
   Children flowsets: 2 4 
  0 ip           0.0.0.0/0             0.0.0.0/0       39    57252  0    0   0


Queues:
q00001  50 sl. 0 flows (1 buckets) sched 1 weight 0 lmax 0 pri 0 droptail
q00002  50 sl. 0 flows (1 buckets) sched 2 weight 0 lmax 0 pri 0 droptail
q00004  50 sl. 0 flows (1 buckets) sched 2 weight 0 lmax 0 pri 0 droptail

[farmerjohn]

@farmerjohn reboot seems to have fixed.