Multiple LAN on Pf Sense

danielino1981

Good morning
I saw that Pfsense only allows you to create one Lan.
How can I create more Lan?
For example

LAN 1
192.168.1.0

LAN 2

192.168.2.0

LAN 3

192.168.3.0

What works should I use?
I don't want the VLANs

Gertjan

@danielino1981 said in Multiple LAN on Pf Sense:

I saw that Pfsense only allows you to create one Lan.

Look again, use any of these official sources :

Not offcial, but fun : how many interfaces for pfSense ?

Take a minute or two (max) and you find people who mounted dozens of 'LAN' type interfaces.

You are actually limited to number of PCI slots in your system.
If that's a limit, change your system ^^

edit : Look here : https://shop.netgate.com/products/5100-pfsense
The interfaces labelled 'LAN' are all LAN's with their own IP network.
Not a switch or VLAN's.

JustAnotherUser

Assuming you have 3 NICs-

You just configure each NIC with the sub-net:
re1 192.168.1.0/24
re2 192.168.2.0/24
re3 192.168.3.0/24

If you have one NIC you just set it up with the correct netmask:
re1 192.168.1.0/22

Will give you 192.168.0.0 - 192.168.3.255 on one NIC

JKnott

@danielino1981 said in Multiple LAN on Pf Sense:

I don't want the VLANs

If you don't want to use VLANs, you'll need a separate interface for each LAN. The Qotom comptuer I use has 4 Ethernet ports, so I could have 3 LANs without using VLANs.