Multiple LAN on Pf Sense
-
Good morning
I saw that Pfsense only allows you to create one Lan.
How can I create more Lan?
For exampleLAN 1
192.168.1.0LAN 2
192.168.2.0
LAN 3
192.168.3.0
What works should I use?
I don't want the VLANs -
@danielino1981 said in Multiple LAN on Pf Sense:
I saw that Pfsense only allows you to create one Lan.
Look again, use any of these official sources :
Not offcial, but fun : how many interfaces for pfSense ?
Take a minute or two (max) and you find people who mounted dozens of 'LAN' type interfaces.
You are actually limited to number of PCI slots in your system.
If that's a limit, change your system ^^edit : Look here : https://shop.netgate.com/products/5100-pfsense
The interfaces labelled 'LAN' are all LAN's with their own IP network.
Not a switch or VLAN's. -
Assuming you have 3 NICs-
You just configure each NIC with the sub-net:
re1 192.168.1.0/24
re2 192.168.2.0/24
re3 192.168.3.0/24If you have one NIC you just set it up with the correct netmask:
re1 192.168.1.0/22Will give you 192.168.0.0 - 192.168.3.255 on one NIC
-
@danielino1981 said in Multiple LAN on Pf Sense:
I don't want the VLANs
If you don't want to use VLANs, you'll need a separate interface for each LAN. The Qotom comptuer I use has 4 Ethernet ports, so I could have 3 LANs without using VLANs.