SG-3100 no DHCP or Internet after power outage
-
Hi Folks,
I'm at a lost.. I have been seeing an issue where the router would not come back up after a power or internet outage. Typically it comes back on after a restart of the router via the console cable.. Some times I would have to do a ping from console. I think once I did restartdhcpdI can't ping the internet by name or IP address.
My internet is working.. I have an old router and it came right up..
Current SG-3100 is Netgate pfSense Plus 21.02.2-RELEASE (arm)
WAN (wan) -> mvneta2 -> v4/DHCP4: xx.xxx.xxx.xx/19
LAN (lan) -> mvneta1 -> v4: 192.25.25.1/24
OPT1 (opt1) -> mvneta0 ->
WIFI_GUEST (opt2) -> mvneta1.3 -> v4: 192.25.27.1/24I do have pfSense_dev running.. I can put the whole reboot log on here, but I'm not seeing any real changes. There have not been any changes to the system that I can think of.. Please help get my system back up!!
-
Can you ping the old router?
Some things don't seem right at your setup
a. Wan is very strange to have a /19 subnet
b., 192.25.25.0/ 24 isn't private. Are you affiliated with HP? -
@netblues I eventually got it up and running. I’m not sure how or why! The LAN IP was not my actual IP address.. I’m using a non routable IP address.
The WAN is setup for DHCP. The info was taken from the console screen. So it was nothing that I have set. I just went through the web setup routine for that part
I could ping the router, but couldn’t get to the web interface. Once it finally woke up or started working, I could get to the interface.