Outbound NAT rule for a single host not working

[noamlugasi]

Hi,

I have a NG device with OpenVPN installed. All LAN traffic goes to the internet though the VPN interface using a single outbound NAT rule for the entire LAN subnet.
I need to have one host that will route through the WAN interface rather than the VPN so i add an outboud NAT rule as follows:

Source: Network
IP: 192.168.1.200 (the host IP)
Mask: 32
Destination: Any
Interface: WAN

I placed the rule at the top of the outbound rule list but the host keeps going through the VPN interface.
Is it something i'm missing or the NG just needs a reboot or anything?

Thanks,

Noam,

[KOM]

@noamlugasi Don't you also need a firewall rule to force that client's traffic out the WAN gateway?

[noamlugasi]

@KOM No, the default rule should be fine.