Diagnostics ARP Table 504 Nginx Gateway Timeout
-
@johnpoz Agreed - and it never used to, which is why I think it's become a little confused...
Time to reset its brain when I re-enable it (later).
-
It will it you have enabled this:
Active Network Discovery Toggle the periodic discovery of network devices using multiple techniques that include ARP scan, MDNS and SSDP.That's not enabled by default.
-
Nor should it be enabled on your wan interface ;)
-
Yep, I get all that.
As mentioned, I hadn't altered the ntopng config for ages, so I don't think that was it - but I've blown away the config now so I can't check.
Nevertheless, it's solved so that's all I care about.
-
@manicmoose
Thanks for the information, unfortunately wasn't able to check in for a week.I have uninstalled ntopng, but still got a long waiting time to see the ARP entries. Will do a tcpdump to check further.
-
did flush the cache? The items would still be there for 20 minutes even if you uninstall what was arping for them.
-
@lddj9090
How can i clear the arp cache on pfsesne, all at once? -
2-5 minutes.
-
arp -d -a
or from the gui click the clear arp table.
-
Cleared the cache and tried again, still spinning for ages and timeout. Could "snort" be somehow involved?
-
You need to figure out why your wan has anything it.. Have gone over why there should be nothing in your wan network in your arp cache other than your gateway..
NOTHING should just be arping for every IP on a network.. especially our wan.. So there is something you set to arp, or some other reason.
You need to sniff on your wan and figure out what - are you arping, is it gratuitous arps? etc..
Out of the box pfsense with any package installed shouldn't be arping neither your wan network your lan side networks.. It would have to be some setting you did.. Like the ntop setting for network discovery.
-
@johnpoz
Alright, I will investigate further and talk back to you later. Thanks for the support so far! -
@lddj9090 Do you actually have WAN side ARP entries with public IPs?
Are they eventually being resolved by reverse DNS?
Could a completely different problem than @manicmoose had.
Steve
-
Last time someone was seeing ARP for random hosts on WAN it was from having their subnet mask on the WAN interface set to something ridiculous like
0instead of what it should have been (e.g.24,29, etc.)If your WAN is set to a static address, double check your IP address and subnet mask settings.
Whatever is upstream may be answering ARP for anything with its own MAC. That's unusual but not unheard of.
-
As far as I am aware, there aren't any public IP in my ARP output.
Here is a snippet of the ARP -a output: arp_snippet_pfsense.txt
We do have high availability sync enabled. As well as a bunch of Virtual IPs (CARP). Even though they all seem to be configured correctly, could that cause something unexpected?
-
-
And how many entries in your arp table? 1000's ??
-
@johnpoz
254 -
Then I doubt your problem is related to what the other poster was seeing in slow downs do to trying to resolve public IP names.
Is pfsense not dhcp or dns for this network - where resolving names could be hindered, for ptr?
-
@johnpoz said in Diagnostics ARP Table 504 Nginx Gateway Timeout:
hindered
Pfsense is DHCP for certain networks, not for all though. Also pfsense handles DNS request from our internal DNS server, so we can use DNS blocklists.
Pfsense DNS Override has active settings for some domains. Could there be an issue?
