Netgate SG-7100 1U WAN port
-
Hi Netgate Community,
Is there a way to connect our ISP via RJ45 to our Netgate SG-7100 1U?
I believe, the SG-7100 1U WAN port is an SFP, any recommendations for us?
Thank you.
-
If nothing else you could isolate one of the switched ports.
https://docs.netgate.com/pfsense/en/latest/solutions/xg-7100/configuring-the-switch-ports.html
This is more of a how-to on doing that (3100, but basically the same process):
https://docs.netgate.com/pfsense/en/latest/solutions/sg-3100/switch-overview.html -
My SG-7100 has the default WAN on port 1 of the switch witch is a 1Gb RJ-45.
-
Yes, the default WAN port is Eth1 which is RJ45.
If you need >1Gbps though you would need to use an expansion card to use RJ45. You cannot use an RJ45 SFP+ module in the on-board ix0/1 ports.
Steve
