Switching NAT from Manual to Hybrid
-
I have a remote 7100 that I had to setup some manual NAT rules as our ISP uses VRRP with private addresses on the WAN. I'd like to switch the NAT mode to Hybrid so I don't have to keep creating all the NAT rules manually. Since I have to have a specific outbound NAT rule to route our traffic to the public IP for my remote connection to work, I wanted to make sure that if I switch from Manual to Hybrid my 7100 won't lose the manual rules I've created.
It's a 5 hour drive to the data center, so I want to be sure before I make the switch. Thanks for any help!
-
I answered my own question, I made the switch and it worked as expected. The autogenerated rules populated leaving all of my custom rules intact.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy