WatchGuard Firebox II and the LED triangle

[hammaskejju]

Hello!

I have installed pfSense on Firebox II and it's working wery fine. I'm running pfSense on CF card. Now im curious about getting those lights up. Even just "Armed" light would be enough. Now everything is black and I don't got any information, if there's something wrong or even if the whole device is shut down.

I don't have enouhg skills to compile code etc. so If someone has done this allready, I would very gladly take that information. Or if there's some instructions somewhere..

And BIG thanks for the site: "http://www.ls-net.com/m0n0wall-watchguard/" It was worht of gold!

[otta]

Hi there, was wondering if you could please expand on how you managed to get this to work… What release did you use? how did you write the image? I've been trying for ages and have had no success at all, so any tips or ideas would be great.

Thanks
Karl

[Spy Alelo]

Look at this thread and see if there is anything useful in there:

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=17112&postdays=0&postorder=asc&start=0