Routing to a Meraki mesh
-
We have a set up where most of our sites are meshed together via an Meraki VPN. I now have a pfSense box that I have added to the Mesh via a IPSec VPN. My local subnet is 192.168.2.0/24, there are multiple remote LANs in the mesh, but the one I want to use is 10.1.0.0/24, so I have set that as my remote subnet on the IPSec VPN.
I was hoping that I could then ping 10.1.0.4, but I cannot get that to work. I suspect that I need a static route to tell pfSense to route traffic to that machine through the IPSec VPN, but when I try I run into the problem that I cannot use the IPSec VPN as a gateway.
I am probably doing something very simple wrong, but I cannot work out how to solve this, so any help would be greatly appreciated.
-
When you said Meraki mesh, I assume you have multiple sites using Meraki? If so, you need to make sure your local pfsense has ipsec to the site where the 10.1.0.0/24 subnet is.
