Put PFsense firewall as internal network segregation and configure..?

[eeebbune]

Hello,

I am beginner of PFSense appliance so please understand about my question.

I'm having an issue to configure PFsense (plus, XG-1537) to make trunk port in order to connect Cisco L2 switch.

Here is my goal:

WAN--<Firepower>--<Core switch>--<PFSense firewall>--<Cisco L2 switch>--<Servers>

so PFsense firewall does NOT have WAN port, it only has LAN port + interface ports.

• Core switch port has Trunk port.
• PFSense LAN port + Interface ports are in 1 bridge.
• LAN port + Interface ports knows all VLANs information.
• Cisco L2 switch Port which is connected to PFsense has Trunk.
• Server has VLAN 10 (Access port from Cisco L2 switch)

#Problem:

• When I connect Core switch - PFSense - Ubiquiti switch, Server network is fine. (Internet connection good)
• However, When I connect Cisco L2 switch rather than Ubiquiti switch, Server network is 'No internet' state.

Can you tell me which configuration that I missed?

[stephenw10]

Dupe: https://forum.netgate.com/topic/166837/put-pfsense-for-internal-network-segregation-config-with-cisco-switch