Crash Report

mhowland24

Hey guys, I just noticed I'm having some connectivity issues on my unraid server so I logged into pfsense and noticed that a crash report was available. Hopefully a dev can have a look and let me know whats going on, thanks

textdump.tar.0

stephenw10

Important part of that is:

db:0:kdb.enter.default>  show pcpu
cpuid        = 7
dynamic pcpu = 0xfffffe02a8822580
curthread    = 0xfffff80006621620: pid 12 "irq264: bce0"
curpcb       = 0xfffffe000031cb80
fpcurthread  = none
idlethread   = 0xfffff8000623d620: tid 100010 "idle: cpu7"
curpmap      = 0xffffffff834f1c40
tssp         = 0xffffffff835a35a8
commontssp   = 0xffffffff835a35a8
rsp0         = 0xfffffe000031cb80
gs32p        = 0xffffffff835aa200
ldt          = 0xffffffff835aa240
tss          = 0xffffffff835aa230
tlb gen      = 896087
db:0:kdb.enter.default>  bt
Tracing pid 12 tid 100107 td 0xfffff80006621620
kdb_enter() at kdb_enter+0x3b/frame 0xfffffe000031c600
vpanic() at vpanic+0x19b/frame 0xfffffe000031c660
panic() at panic+0x43/frame 0xfffffe000031c6c0
trap_pfault() at trap_pfault/frame 0xfffffe000031c710
trap_pfault() at trap_pfault+0x49/frame 0xfffffe000031c770
trap() at trap+0x29d/frame 0xfffffe000031c880
calltrap() at calltrap+0x8/frame 0xfffffe000031c880
--- trap 0xc, rip = 0xffffffff80520cf0, rsp = 0xfffffe000031c950, rbp = 0xfffffe000031c9e0 ---
bce_intr() at bce_intr+0x420/frame 0xfffffe000031c9e0
intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe000031ca20
ithread_loop() at ithread_loop+0xe7/frame 0xfffffe000031ca70
fork_exit() at fork_exit+0x83/frame 0xfffffe000031cab0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe000031cab0
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---

So something in the bce(4) driver. Strangely it appears to have hit that as it was shutting down:

<6>pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 done
All buffers synced.
Uptime: 6d23h24m52s
ukbd0: detached
uhid0: detached
uhub4: detached
uhub3: detached


Fatal trap 12: page fault while in kernel mode
cpuid = 7; apic id = 07
fault virtual address	= 0x10
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80520cf0
stack pointer	        = 0x28:0xfffffe000031c950
frame pointer	        = 0x28:0xfffffe000031c9e0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 12 (irq264: bce0)
trap number		= 12
panic: page fault
cpuid = 7
KDB: enter: panic

No time stamps to be sure though, is that right?

Any reason you're still running 2.4.5p1?

Steve

mhowland24

@stephenw10 I actually just updated to 2.5.2, but the notification for the crash report was still there so I decided to post it here. Should I clear it and hope for the best?