Crash Report
-
Hey guys, I just noticed I'm having some connectivity issues on my unraid server so I logged into pfsense and noticed that a crash report was available. Hopefully a dev can have a look and let me know whats going on, thanks
-
Important part of that is:
db:0:kdb.enter.default> show pcpu cpuid = 7 dynamic pcpu = 0xfffffe02a8822580 curthread = 0xfffff80006621620: pid 12 "irq264: bce0" curpcb = 0xfffffe000031cb80 fpcurthread = none idlethread = 0xfffff8000623d620: tid 100010 "idle: cpu7" curpmap = 0xffffffff834f1c40 tssp = 0xffffffff835a35a8 commontssp = 0xffffffff835a35a8 rsp0 = 0xfffffe000031cb80 gs32p = 0xffffffff835aa200 ldt = 0xffffffff835aa240 tss = 0xffffffff835aa230 tlb gen = 896087 db:0:kdb.enter.default> bt Tracing pid 12 tid 100107 td 0xfffff80006621620 kdb_enter() at kdb_enter+0x3b/frame 0xfffffe000031c600 vpanic() at vpanic+0x19b/frame 0xfffffe000031c660 panic() at panic+0x43/frame 0xfffffe000031c6c0 trap_pfault() at trap_pfault/frame 0xfffffe000031c710 trap_pfault() at trap_pfault+0x49/frame 0xfffffe000031c770 trap() at trap+0x29d/frame 0xfffffe000031c880 calltrap() at calltrap+0x8/frame 0xfffffe000031c880 --- trap 0xc, rip = 0xffffffff80520cf0, rsp = 0xfffffe000031c950, rbp = 0xfffffe000031c9e0 --- bce_intr() at bce_intr+0x420/frame 0xfffffe000031c9e0 intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe000031ca20 ithread_loop() at ithread_loop+0xe7/frame 0xfffffe000031ca70 fork_exit() at fork_exit+0x83/frame 0xfffffe000031cab0 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe000031cab0 --- trap 0, rip = 0, rsp = 0, rbp = 0 ---
So something in the bce(4) driver. Strangely it appears to have hit that as it was shutting down:
<6>pflog0: promiscuous mode disabled Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `bufdaemon' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 done All buffers synced. Uptime: 6d23h24m52s ukbd0: detached uhid0: detached uhub4: detached uhub3: detached Fatal trap 12: page fault while in kernel mode cpuid = 7; apic id = 07 fault virtual address = 0x10 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80520cf0 stack pointer = 0x28:0xfffffe000031c950 frame pointer = 0x28:0xfffffe000031c9e0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 12 (irq264: bce0) trap number = 12 panic: page fault cpuid = 7 KDB: enter: panic
No time stamps to be sure though, is that right?
Any reason you're still running 2.4.5p1?
Steve
-
@stephenw10 I actually just updated to 2.5.2, but the notification for the crash report was still there so I decided to post it here. Should I clear it and hope for the best?