HA multi Wan and Multple core switches
-
Hi All,
I've got a pair of netgate's running in carp with a single wan and lan. I've just upgraded and have a second wan and also adding another core switch. I currently have a vlan'd wan switch with 3 connections for each interface, primary, secondary and either the lan in and out or the wan.
I now would like to use the 10Gb fibre on the netgate for each switch so one port from the primary and secondary to one switch and then other primary and secondary to the other switch. But I'm unsure how to setup the addressing. I was thinking about have a second VIP for the second LAN but using one in the same subnet.
The Lan Switches are Nexus 3k's and will be running VRRP so, the cisco carp.
Could you let me know what I should do about the LAN addressing please.
Many Thanks
Mark