Wan failover doesn’t work and bigger problems
-
Hmm, well I would use a gateway directly rather than a group with one gateway in it.
21.05-REL on the 3100 has known issues that will cause you problems so I would update if at all possible.
Can you limit SSH to know IPs or to dyndns addresses perhaps?
Steve
-
@stephenw10 Hi Steve, it looks like issue 12004 is possibly what was causing the pain on boot issues. The significance of a PHP crash wasn't something I'd fully appreciated.
With 21.05.2 the system appears to start up happily.
It would be super helpful if a fix that affected platforms referenced the models in the release notes.
Thanks for your help. Just the WAN failover to do some more testing with.
-
@idiotzoo said in Wan failover doesn’t work and bigger problems:
helpful if a fix that affected platforms referenced the models in the release notes
Although the 3100 isn't directly mentioned in https://docs.netgate.com/pfsense/en/latest/releases/21-05-1.html it is one of the few 32 bit ARM models. (also the 1000).
-
Mmm, I agree it would have been useful there. It also didn't affect the SG-1000 directly because it only affected multicore devices. Really only the 3100.
But you should always be on the latest version really unless you have a very good reason not to be.
Steve
-
@idiotzoo said in Wan failover doesn’t work and bigger problems:
Just the WAN failover to do some more testing with.
Hello!
All of my multi wan failover configs running on 21.05.2 cratered due to this:
https://redmine.pfsense.org/issues/11570
I manually reverted this code change from this issue to get it working again.
John
