Crashdump Master FW rebooting
-
@stephenw10 The backup server never had the MAC for the TAP interfaces even when it was MASTER. I dunno why...
The other funny thing is this:
We took another Dell R210 server and used the SSD with pfSense from the primary FW, the primary FW would reboot anyway. So it was not an HW issue cause it was a completely "new" server running the exact same pfSense. install.
The secondary FW has been running for 114 days straight (since the updated to 2.5.2 think), on the same Server HW model.
I think we are planning to buy Netgate HW next year (new budget). But it would be really great to get to the bottom of this.
-
Hmm, it looks almost identical to this: https://redmine.pfsense.org/issues/5473
But that was fixed years ago.I assume you had been running 2.5.2 for a while before this started?
Did you make any other sort of change that coincided with it starting?
Steve
-
@stephenw10 yeah we have been running 2.5.2 for months before this issue started.
By looking at the auto backup service on the primary FW, I cannot spot any substantial changes (I think I only see a change to the ovpns interface).
On the seconday FW instead i had added the ovpns interfaces and bridges for the respective LAN interfaces.
-
How often are you seeing the crashes?
You might try changing isrdispatch from direct to deferred since that's the code path that seems to be triggering it.
See: https://docs.netgate.com/pfsense/en/latest/hardware/tune.html#pppoe-with-multi-queue-nicsSteve
-
@stephenw10 The crashes were random, sometimes happened after hours some times after minutes, it crashed about 8 times within say 24h.
The crashes stopped after removing the TAP interfaces and after upgrading the network cards to SFP hence I did not follow your suggetion re isrdispatch.
-
Hmm, interesting.
Good to know for future reference. Thanks for following up.Steve
-
@stephenw10 I might re add the TAP interfaces after the xmas break and report back any issues
-
@stephenw10 One question, a bit unrelated perhaps to this issue. Is it normal for the firewall WEBUI to stall when adding VLAN and/or interfaces in a HA setup?
-
It depends what you mean by stall. Adding a new interface can trigger quite a few things especially in an HA pair but I wouldn't expect it to take very much longer than any other change.
Steve
-
@stephenw10 Next time i add an interface/VLAN I will time it and let you know
