Helpful Install Notes:Read This.
-
A couple of things I found when installing are as follows.
- Set you BOOT portion of BIOS to UEFI only. (or just UEFI) ***
Important!
- Do indeed use the "Etcher" colored textapp to create the USB stick * Very simple!
-
If you get an error cannot find something, after the initial menu loads, try another USB stick. I had luck with "Kingston DataTraveler 100 G3 16GB"
(my PNY usb2.0 didn't work) then it loaded. -
Follow the walk-through when installing, it is very helpful to have that up when going through the install process.
- Set you BOOT portion of BIOS to UEFI only. (or just UEFI) ***