No IP from DHCP on my DMZ
-
Hi
I have three ethernet port on my pfSense, WAN, LAN and DMZ
The first two works nice so it was time to try to make a DMZ network.
I did give DMZ 172.16.0.1/24 when I create a DMZ interface.
After that I did go and activate a DHCP for DMZ and give it 172.16.0.50-172.16.0.60.
Then I connect a cable to the port and to a switch and connect a Raspberry pi to the switch. LED show and that but I get no IP on my Raspberry Pi, just a 169 address.Not sure what to do.
-
@cazz
Check the log.
Status > System Logs > DHCP -
@viragomann
Thanks, did forgot it was a log to read :)
Find the problem, it did look that DHCP was on but it was not. -
J jimp moved this topic from Problems Installing or Upgrading pfSense Software on
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.