pfsense 2.6.0 hang but I can ping LAN interface
-
Hi,
I've take an old pfsense box (AMD G-T40E Processor
2 CPUs, 4Go RAM SSD card storage) and reinstalled new pfsense 2.5 one month ago. I've mounted an OpenVPN Tunnel, some DHCP reservation and some basic firewall rules. Ressources utilization are normal when it run (mem usage 12%, CPU 5%, Disk ZFS 6%) Everything working well but router always hang after 24-48h of activity.When it freeze, I can't login WebUI or SSH. If I connect to serial console port, I can't do anything except CTRL+T giving this message :
When the problem happens, WAN side seems to works for few hours (2-3) but after that no internet at all on site. At any moments, LAN ping always response even If I can't login to WebUI and SSH.
I hoped upgrade to 2.6.0 would resolve the problem = same problem!
Thanks for any suggestions to help me how to resolve that problem
-
If you leave the console connected do you see any errors shown before it hangs?
That sort of error sounds like a failing drive. If the drive disconnects some services remain up for some time but eventually fail.
Steve
-
@stephenw10
Thanks for you help. That's on SD Card ... I will check to clone it on another one and retry! -
@stephenw10
I think you were right, I change the pfsense for another old one identical but I changed the SD Card and no problem since 4-5 days ... a record since the beginning!Thanks again!
