2WAN ADSL - Can not reach router from LAN
analias last edited by
I have setup a loadbalancer with 2WANs. The lb works perfectly, except for the fact that I cannot reach my two routers from the lan!
My setu is like this:
Router1 internal ip - 192.168.0.1 -> WAN (192.168.0.2)
Router2 internal ip - 192.168.1.1 -> OPT1 (192.168.1.2)
LAN -> 192.168.2.1
the two routers automatically nat to the dinamically assigned address of the isp.
As said above, load balancing works ok, but if i try to reach the admin (or simply try to ping the router) console of router1 (on WAN interface) from a machine on the lan, all the packets go out of the OPT interface, and viceversa if I try to reach router2 (on OPT1) all packets go out of the WAN! and obvioulsy non of the packets arrive to the correct router. If I open a shell on the firewall I can reach correctly the routers from the inside (in fact, I can use ssh -L to forward a local port and access the two routers).
I did not add any routes or firewall rules (except one default one for the balancer). Anyone has any ideas?
hoba last edited by
Add pass rules above your default any to loadbalancer rule:
pass, proto any, source any, destination WAN subnet, gateway WAN-gateway
pass, proto any, source any, destination OPT-WAN subnet, gateway OPT-WAN-gateway
You have to exclude these subnets from loadbalancing.