Bridge Not Passing External STP

[sattia]

I have a switch with STP configured at all ports.

A firewall, 2.0 ALPHA ALPHA version 2009-06-15 then upgraded to 2009-07-26, is connected to one of the switch ports through its WAN port.

All configurations are at the defaults.
LAN has the IP Address 172.16.1.2/24
OPT1 has no IP address and is configured as a bridge with WAN.
All interfaces have the PASS rule from any IP allowed.

I login to shell and tcpdump on WAN and I can see STP packets from the switch. When I tcpdump on the OPT1 I cannot see this STP neither any other STP.

I also enabled "disable all packet filtering" and no avail too.
What's wrong?

[sattia]

Is this off topic? or the wrong section?
I need your help as I really failed to fix it.
I have no FreeBSD nor pfSense/m0n0wall experience.
My experience is 100% Linux.
Any pointers to the problem will be very helpfull.

[nocer]

Hi,

If this started happening since you updated to 726, then go back to 615, otherwise check to see if your pfbox configured passing the mcast frames correctly as bpdu uses well-known mcast addr for its destination. In your case mcast frames must have been discarded somewhere between WAN and OPT1.

cheers,