How to put router before pfsense 22.01 firewall
-
Removed, as it clutters up the OP's topic
/Bingo
-
@rupocinski said in How to put router before pfsense 22.01 firewall:
I got the openVPN up and running
So Status > OpenVPN showed the client as UP with traffic passing?
but the interface would not connect
What interface? The assigned OpenVPN interface?
If the OpenVPN tunnel was up that interface would show as connected.Steve
-
@bingo600
Ok so what I want to do is have a vpn for encryption then my firewall then a the dhcp router. I just wanted to use the pfsense as the firewall so that means I would always be connected to VPN. I am worried about security. I know the firewall is good but would feel better with a vpn in place. Not really happy with expressvpn subscriptions up in sept so not renewing it. Would like another alternative to this whole configuration setup. So you use your VPN now and then not all the time. Sounds like a good setup. What advice do you have for me at this point you know what I want to do, firewall the DHCP firewall had issues dropping clients at times so I thought why not use it and put a router behind it to handle the DHCP which are all static routes anyway with MAC. Just want to be secure. I setup the pfsense as it was supposed to be and I did Pfblocker also. Will install Snort also. -
@rupocinski
I'm sorry i "Polluted" your thread, shouldn't have done that.I think you should continue your debugging with @stephenw10
And get the OpenVPN working on pfSense.
That would give you some experience with pfSense configuration, and the basic idea of OpenVPN client setup.The setup i have is not an easy setup to make, unless you're quite experienced in Linux , Networking and pfSense.
One thing though - Re. your issues.
You are not in a "VPN restricted country" are you ?
And have you tried without pfBlocker active ??/Bingo
-
This post is deleted! -
@rupocinski
Please answer @stephenw10 's post here
https://forum.netgate.com/post/1036574I'm also wondering which interface that is down ...
Is it the OpenVPN client interface ?I haven't any experience in setting up a pfSense ExpressVPN Client setup, as i have always chosen to do the "VPN Provider VPN-tunneling" elsewhere.
My OpenVPN experience is in Lan2Lan or "Client Dialin" (RoadWarriors).
What does your Status --> System Logs --> OpenVPN show on "Client connect ?
-
This post is deleted! -
Go to Status > OpenVPN. Does it show the client as connected with traffic passing?
If not go to Status > System Logs > OpenVPN and look for errors.
Steve
-
This post is deleted! -
Ok so the OpenVPN looks something like this?
What exactly shows as down still on the dashboard?
@rupocinski said in How to put router before pfsense 22.01 firewall:
I tired my IP and it is my local so it is not connected to the interface
So by 'connected' you mean your traffic is still being routed via the WAN and not over the VPN?
You have to do this one step at a time. So the first thing to do is make sure the OpenVPN client is actually connected to the server.
Then try to ping something over it. So go to Diag > Ping and ping google.com with the source IP set as the VPN like:
-
So it's the "Interface you're talking about is displayed like this on the dashboard
But with a "Red Down arrow" ?
And your Status --> OpenVPN
Shows something like this , where Status is "up" ??
Do you have any Numbers at "Bytes Sent" & "Received" ?
/Bingo
-
Yeah, if you have an assigned OpenVPN interface (which you must to policy route across it) the interface status should reflect the OpenVPN tunnel status.
-
Are you using Windows 7/8/10
You have a built in "Snipping tool" , where you can "Cut out parts of the screen image"
After that you can "Copy" the image in the "snipping tool" , and then "paste it in the pfSense message" (CTRL-V)
Some screen images from you , would be super helpful.
/Bingo
-
This post is deleted! -
Ok, please show us exactly what shows as down and how that interface is configured.
Also if we can see the OpenVPN status page we might be able to see an issue.
-
This post is deleted!
