Netgate Hardware compatability with Eero
-
@johnpoz In router mode the eero would be handing out its own IPs to its LAN, and NATting to its WAN (the pfSense LAN). Enabling bridging on the eero disables its NAT and DHCP.
I don't know if it will function "in router mode" with only the LAN connected, like many consumer routers do.
-
@steveits said in Netgate Hardware compatability with Eero:
I don't know if it will function "in router mode" with only the LAN connected, like many consumer routers do.
It should - the question would be is there a way to disable its dhcp server while in router mode?
-
@johnpoz said in Netgate Hardware compatability with Eero:
It should - the question would be is there a way to disable its dhcp server while in router mode?
Looking at the software I don't think so...I see choices of Automatic, Manual (choose IP range), or Bridge.
But since there is a Bridge mode that does disable DHCP and NAT, that seems the best choice.
-
@steveits said in Netgate Hardware compatability with Eero:
Bridge mode that does disable DHCP and NAT, that seems the best choice.
I would concur - if it supports a bridge function, that would be best choice I would think as well.
-
So looks like you still get mesh wifi.
-
@steveits Thank you for your response. Do you see any operating issues in pfsense or with Eero when connected in Bridge mode? I am assuming, you didn't lose any functionality in pfsense and/or with Eero.
-
@stephenw10 Thank you for sharing the link. Yes, in that, I see, "If your network configuration does require you to bridge your Eeros, rest assured you'll still experience all of the speed and stability benefits of TrueMesh."
Based on this statement, I interpret that pfsense will work as a router, and Eero will be connected to pfsense LAN in bridge mode, and when having another Eero satellite, it will work in mesh with the primary Eero device.
-
@gdzbedfz Functionality-wise, you can't use the eero subscription security service, eero Secure. Others are in the doc Stephen linked. ACS might impact you if you live in an apartment building maybe? That doc page also lists "eero Labs" (their beta testing options) but that's always been visible to me since it currently has WPA3 as optional.
The upshot is for me, no issues using it, and the meshing is fine. I wanted to do everything in pfSense anyway so have always only used bridge mode. The eero can actually be a fallback plan if the pfSense is down, just disable bridging.
-
@steveits Thank you for providing the user experience. This sounds to me, I can go ahead and place the order for Eero 6+.
Yes, I am not much concerned about Eero's "paid" features when I add the Pfsense in between the modem and Eero. I want Pfsense to do everything and Eero to act as an Access Point for the clients and yes Eero as a failover when things get complicated with Pfsense.
I didn't understand what it mean "ACS might impact you".. by any way you mean Air Conditioner? Yes, I live in a 1200sft apt.
Thanks again!
-
@gdzbedfz ACS is Auto Channel Selection on the linked page https://support.eero.com/hc/en-us/articles/115000825206-What-advanced-features-do-I-lose-access-to-if-I-put-my-eeros-into-bridge-mode-
