Routing LAN <> WAN
I need a little help in setting up correct routing between lan and wan.
ok…here we go:
LAN <--------------------> LAN <----------PFSENSE (PPTP)----------> WAN <--------------------> WAN Speedtouch (Bridge Mode) 192.168.0.0/24 192.168.0.200/24 10.0.0.140/24 10.0.0.138/24
I'm not able to ping/telnet the Speedtouch (10.0.0.138)
thx in advance!
TimDows last edited by
Think your firewall rules are blocking this.
Have you got some information about that? (dump of your log files maybe)
iam sorry, but there is no log entry in firewall… :-\
sry…i got following log:
@67 block drop in log quick all label "Default deny rule"
now its not a routing problem, its a rule problem...but what is the default deny rule?
i made a telnet rule, as i made it for other services (working) in 192.168.0.0, but it seems that the default deny rule overrules the manuel telnet rule...
any ideas? thx in advance!
rsingh last edited by
i'm in the same boat with a Speedtouch 516 / PPPoE
This may help you, it didn't help me because I cannot run the redir command after installing the package:
here's what i do from pfsense:
ifconfig fxp0 10.0.0.1/24
- now pfsense should be able to ping and telnet to 10.0.0.138
- i use this to check my line stats
i have not been able to get pfsense to route any of my lan traffic to the modem directly though, clients on 192.168.1.0/24 cannot access 10.0.0.138. for now if i really need to check my modem, i can log into pfsense and telnet to the modem.
ive tested this right now, but nothing happend.. :-
you are right, telnet via ssh on pfsense works for me…