SSL certificate subject doesn't match host...

[johnpoz]

@mheidelberger here is the thing, those sorts of tests are not always valid for for stuff like this.

Pretty sure you have to auth with cert from pfsense to be able to access that stuff.

Must be something at Netgate.

If that was the case why is it working fine for me? Now that @Gertjan mentioned complete power down... I do recall some threads where sim sort of issue, and the correction was to do a complete power down reboot. Let me see if can dig up those old thread I think @stephenw10 had supplied info related to the issue in those old thread(s)

[jbreaux]

@johnpoz I halted my system and unplugged my power cable for 5 minutes. Plugged back in power cable and booted up. Problem remains.

[SteveITS]

@johnpoz I think you're thinking of
https://docs.netgate.com/pfsense/en/latest/troubleshooting/upgrades.html#segmentation-fault-in-pkg which is a different error. And IIRC was fixed after upgrading to either 21.05 or 22.01 (don't recall which).

@zitstif What are you upgrading? (to 22.01?)

22.05 RC has been out, it might be possible they are prepping for release... in which case if you're upgrading packages be sure to get them for the correct pfSense version.

[ex1580]

Of the Netgate hardware I can check at the moment I only have a couple of SG1100s running pfSense Plus (22.01-RELEASE) and it is happening on both of them (on different sides of the USA no less). One of those is pretty basic, no packages to speak of. I did also check a test VM I use running pfSense CE (2.6.0-RELEASE) and that one is working fine. This might be one of those really specific issues and I am fairly certain that a reboot is not going to fix it.

[johnpoz]

@steveits yeah prob right, but why I said sim sort of issue ;) hehehe

I don't have a sg1100 to test with.. But your theory of prep for 22.05 release could be on to something.

[seankann]

@zitstif I'm getting the same issue as well with a new SG-1100. Just picked it up today.

[JonathanLee]

@zitstif @johnpoz @ex1580 @seankann @jbreaux @mheidelberger @Gertjan

I also have the same issues on SG-2100 Max. Netgate is about to release a new stable version. I think that has to do with it currently.

login-to-view
(Image: Same Errors)

login-to-view

[zitstif]

@steveits I'm already on 22.01:

[22.01-RELEASE][admin@firewallname]/root: uname -a
FreeBSD firewallname 12.3-STABLE FreeBSD 12.3-STABLE plus-RELENG_22_01-n202637-97cc5c23e13 pfSense arm64

I just check for updates on a regular basis. I ran into this issue just today and was wondering if there was something wrong with my setup.

[JonathanLee]

@zitstif One could say that 21.05 supercedes the version we are running. After it will take the official place of stable version. However to change over this system requires some background changes the could cause some confusion to those that are only running a stable version. The system that the firewall is referencing to check for updates would be adapted to show the newest version. Again that RC version we are not running running as it is marked RC or release candidate. Once it becomes officially the new stable version I hope it will show are a new update ready to install. Netgate may be currently going through a update normalization to move all over to a new stable version.

[jbreaux]

And now everything is working.

[zitstif]

@jbreaux yep working for me!

[ex1580]

It's magic! The update check is working here too now. Thanks!

[JonathanLee]

@ex1580 mine has also returned with a snort update I just installed. YEAH