SG3100 throughput
-
Hi,
I'm aware of the published specs for the SG3100. I wanted to ask if anyone out there had real-world experience with the throughput so that I can potentially adjust my expectations.
I recently changed from a 100/20 Mbps plan to a 350/60 Mbps plan. I can consistently peg the upload side of things on both plans, but the download side seems to be peaking a ~250 Mbps.
I have a fairly sane ruleset of maybe 50 total rules. I have the onboard switch configured with individual VLANs on each of the 4 physical ports. The OPT port has a trunk with 2 VLANs on it.
Before I get in touch with the ISP, I wanted to ensure I'm not doing anything "wrong" (that would limit throughput).
Thoughts?
BB -
@jd3 You can back up your config, restore to factory defaults, and then try your speed tests again -- if the speeds are still slow then you likely have an upstream issue. If they go back to what you're expecting then it's likely a configuration issue.
-
Mmm, the 3100 should pass far more than that with a clean config if traffic conditions allow.
Do you have packages installed? Traffic shaping enabled?
Steve
