Multiwan v6
-
I have At&t and Spectrum and I'm unable to get a prefix with both providers at the same time.
I suspect this is due to at&t using duid-en and spectrum just using a raw duid.How do I configure my 2nd wan to use a raw duid instead of the duid-en settings configured for the primary wan?
-
You don't mention what version of the software you're running, but if it's not 22.05 you might be running into bug #6880.
-
@dem 2.5.2
-
The latest is 2.6.0.
-
@jknott I didn't upgrade because of the issues with intel nics and the at&t fiber bypass on 2.6.x
Apparently, fixed drivers aren't going to be provided till 2.7 so I'm holding off till then. Having my primary connection working is more important then having the latest version.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.