Intel I225-V rev 3
-
Hello,
I have a PCI-E NIC 2.5G that identifies itself as an Intel I225-V rev 3. It works fully in Linux and shows up as a PCI device in pfsense/FreeBSD but is not usable due to an error.
I am currently on:
2.7.0-DEVELOPMENT (amd64)
built on Fri Jul 29 06:15:24 UTC 2022
FreeBSD 12.3-STABLEpciconf -vl from pfSense 2.7.0-DEVELOPMENT
none2@pci0:1:0:0: class=0x020000 card=0x00008086 chip=0x15f38086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel(R) Ethernet Controller I225-V'
class = network
subclass = ethernetError (from dmesg) from pfSense 2.7.0-DEVELOPMENT:
dmesg | grep igc
module_register: cannot register pci/igc from kernel; already loaded from if_igc.ko
Module pci/igc failed to register: 17
igc0: <Intel(R) Ethernet Controller I225-V> mem 0xf7900000-0xf79fffff,0xf7a00000-0xf7a03fff irq 16 at device 0.0 on pci1
igc0: Setup of Shared code failed, error -2
igc0: IFDI_ATTACH_PRE failed 6
device_attach: igc0 attach returned 6
igc0: <Intel(R) Ethernet Controller I225-V> mem 0xf7900000-0xf79fffff,0xf7a00000-0xf7a03fff irq 16 at device 0.0 on pci1
igc0: Setup of Shared code failed, error -2
igc0: IFDI_ATTACH_PRE failed 6
device_attach: igc0 attach returned 6
igc0: <Intel(R) Ethernet Controller I225-V> mem 0xf7900000-0xf79fffff,0xf7a00000-0xf7a03fff irq 16 at device 0.0 on pci1
igc0: Setup of Shared code failed, error -2
igc0: IFDI_ATTACH_PRE failed 6
device_attach: igc0 attach returned 6In Linux (5.15 kernel) it works in 2.5gigabit mode and does not produce any errors during my testing (on same host machine).
lspci from Linux:
01:00.0 Ethernet controller: Intel Corporation Ethernet Controller I225-V (rev
03)lspci -vvv from Linux:
01:00.0 Ethernet controller: Intel Corporation Ethernet Controller I225-V (rev 03)
Subsystem: Intel Corporation Device 0000
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f7900000 (32-bit, non-prefetchable) [size=1M]
Memory at f7a00000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f7800000 [disabled] [size=1M]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable+ Count=5 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 88-c9-b3-ff-ff-bf-73-4f
Capabilities: [1c0] Latency Tolerance Reporting
Capabilities: [1f0] Precision Time Measurement
Capabilities: [1e0] L1 PM Substates
Kernel driver in use: igc
Kernel modules: igcFrom reading through the forum posts regarding the I225-V, it seems like it should be working with a 2.7.x snapshot - but then again I didn't see any mention of a rev 03 specifically so maybe that's the issue?
Any suggestions? Thanks!
-
This post is deleted! -
Rev. 3 is what you want to see there. The earlier revisions had known issues.
igc0@pci0:4:0:0: class=0x020000 card=0x00008086 chip=0x15f38086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'Ethernet Controller I225-V' class = network subclass = ethernetAre you trying to load the kernel module at boot? This error looks odd:
module_register: cannot register pci/igc from kernel; already loaded from if_igc.koLooks like it has an unknown PHY so the same as this:
https://forum.netgate.com/topic/171224/i225-v-is-really-an-i225-it-and-needs-a-patchCan you try 22.05? That patch is present there.
Steve
-
Yes I had tried loading at boot as one of the list of things from one of the other forum posts. I have done a fresh install and tried to upgrade to pfSense Plus but ran into an issue upgrading so I have opened a ticket for that. I'll come back to this issue once that roadblock has been resolved.
-
Okay, so I'm now on 22.09-DEVELOPMENT and the I225 is working correctly! Thanks!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy