Could this be a bug? Radvd cannot start.
-
Hi! I have a TrueNAS host, running a PfSense 2.6.0 VM (HW checks out). After completing my IPv6 config (56 prefix from ISP, LAN IFs set to track WAN and get a 64 subnet, RAs set to unmanaged) I try to start radvd from the widget and nothing happens. I then find in the logs:
General log:Aug 14 01:29:15 root 90434 Bootup complete Aug 14 01:29:16 nginx 2022/08/14 01:29:16 [error] 57205#100583: send() failed (54: Connection reset by peer) Aug 14 01:35:11 php-fpm 84146 /status_services.php: The command '/usr/local/sbin/radvd -p /var/run/radvd.pid -C /var/etc/radvd.conf -m syslog' returned exit code '1', the output was '/var/etc/radvd.conf:17 error: syntax error'Routing log:
(after reboot) Aug 13 23:50:37 radvd 37352 version 2.19 started Aug 13 23:50:37 radvd 37352 exiting, failed to read config file . . . Aug 13 23:53:10 radvd 14610 version 2.19 started Aug 13 23:53:10 radvd 14610 exiting, failed to read config file Aug 13 23:55:09 radvd 42303 version 2.19 started Aug 13 23:55:09 radvd 42303 warning: AdvRDNSSLifetime <= 2*MaxRtrAdvInterval would allow stale DNS servers to be deleted faster Aug 13 23:55:09 radvd 42303 warning: (/usr/local/etc/radvd.conf:111) AdvRDNSSLifetime <= 2*MaxRtrAdvInterval would allow stale DNS servers to be deleted faster Aug 13 23:55:09 radvd 42303 warning: AdvDNSSLLifetime <= 2*MaxRtrAdvInterval would allow stale DNS suffixes to be deleted faster Aug 13 23:55:09 radvd 42638 lo not found: Device not configured Aug 13 23:55:09 radvd 42638 lo not found: Device not configured Aug 13 23:55:19 radvd 42638 lo not found: Device not configured Aug 13 23:55:30 radvd 42638 lo not found: Device not configured Aug 13 23:55:42 radvd 42638 exiting, 1 sigterm(s) received Aug 13 23:55:42 radvd 42638 sending stop adverts Aug 13 23:55:42 radvd 42638 lo not found: Device not configured Aug 13 23:55:42 radvd 42638 removing /var/run/radvd.pid Aug 13 23:55:42 radvd 42638 returning from radvd main Aug 13 23:55:49 radvd 45261 version 2.19 started Aug 13 23:55:49 radvd 45261 exiting, failed to read config file Aug 13 23:58:35 radvd 60723 version 2.19 started Aug 13 23:58:35 radvd 60723 exiting, failed to read config file . . . Aug 14 01:35:11 radvd 85920 version 2.19 started Aug 14 01:35:11 radvd 85920 exiting, failed to read config fileCan anyone help with this?
-
So, I found a GUI "bug". I had correctly set the prefix ID's in the "Tracked Interface" for each VLAN, but at the RA page, I mistakenly reinserted the prefix ID in the fields that are for static (full, not delegated) prefixes. Removed the static prefixes and everything now works. GUI should not let you enter static prefixes on a tracked interface, aside from fc00 or fd. And if it does, it should check if they are correct. One of the prefixes was ::1/64.
