100% Swap
-
swapinfo
Device 1K-blocks Used Avail Capacity
/dev/label/swap0 4194300 4194120 180 100%
Well it does create swap on installation it does not ask me how much space do you need during pfsense installtion.
-
well I did swapoff -a and then swapon -a
Swap become 0 :) .
Hope this will help some one else as well.
-
For info : I've received my 4100 from .... not Netgate directly - from here, a reseller.
That is, from a reseller in France. It had 22.02 ( ? ) which I upgraded to 22.05 30 seconds after unwrapping it using the GUI.It has an "128 GB NVMe M.2 SSD".
I have to try to re install from scratch, see what the "22.05" installer proposes me.
Maybe it was a 22.02 installer issue.Or a plain human error, as these things can happen also ;)
Anyway, I real don't mind right now.Anyway, @scorpoin :
with 25 Gb of memory .....
IMHO : when swap gets used, something must show up in the logs, with something called a 'reason'.
If no one comes up with some explanation , get ready to re install the system and ditch the config ...
-
Mmm, Unbound is using a HUGE amount of memory there.
-
Hello!
Try try the pcscd patch...?
John
-
That's not required in 22.05 and you should be able to see the pcscd process using the RAM if you hit that issue. But in versions before 22.01/2.6 you should certainly check that. Or upgrade!
Steve
