Wireguard Policy Routing

[ervin23]

Dear all,

wonder if you can give me some hints on how to achieve the following:

I have :

LAN:
Clients Group A: 192.168.1.11 to 192.168.1.15
Clients Group B: 192.168.1.16 to 192.168.1.20
Clients Group C: 192.168.1.21 to 192.168.1.25
(can be set up as aliases)

Gateways:
WAN
Wireguard 1
Wireguard 2

I would like to route ex.

Group A to --> WAN
Group B to --> Wireguard 1
Group C to --> Wireguard 2

My Wireguard provider is Mullvad.

• Default WAN
• Fallback to WAN in case a wireguard tunnel goes down
• No DNS leaks
• Default DNS on LAN clients 1.1.1.1

I have the config running on OpenWRT (Policy Routing) but I would like to swap to pfsense.

Hope you can guide me in the right direction ...

[Bob.Dig]

@ervin23 I would guess you would divide those groups by vlans but if you don't want to, it should be doable like you have described it, not done it like that myself though.

You should beginn with something like this and get it working. Also see this.