SG-3100 switch weird behavior (resolved)

mcury

@stephenw10 said in SG-3100 switch weird behavior:

sysctl net.link.ether.inet.max_age=120

done:

[22.05-RELEASE][root@pfsense.home.arpa]/root: sysctl net.link.ether.inet.max_age=120
net.link.ether.inet.max_age: 1200 -> 120
[22.05-RELEASE][root@pfsense.home.arpa]/root:

mcury

Strange, sometimes it doesn't take 3 minutes for the problem to happen.
I'm not sure if the Marvell mac address is really expiring, or if the problem is something else..

I reverted the change, to 1200 and configured a cron job in rpi4

*/1 * * * * /usr/bin/ping 192.168.255.249

Lets see how that goes..

stephenw10

I expect that to solve it.

This has been interesting, I've never had to look into it too closely before. I can't find a specific value for the 3100 switch but for the switch in the 7100, which is from the same family of devices, the default MAC address aging time is 300s (5 mins). That has a larger table size so 3mins for the 3100 doesn't seem that unreasonable.

I suspect this might be simply the traffic pattern you have to the RasPi4. The fact it's mostly UDP where it never sends a reply.

Steve

mcury

@stephenw10 I believe that is the issue..
My cron is smashing pfsense with pings, let me change that cron to 1 minute

mcury

This seems to be enough..

* * * * * /usr/bin/ping 192.168.255.249 -c 2

mcury

This solved the problem, 13 minutes of cron job running, no more problems..

Really thanks for the help @stephenw10 and @johnpoz :)

stephenw10

Cool. I think I prefer reducing the ARP timeout as a solution. You might try setting that to 1 min and see if that also solves it. That's just a system tunable in pfSense, all in the config.
But either will work fine.

Steve

mcury

@stephenw10 said in SG-3100 switch weird behavior (resolved):

Cool. I think I prefer reducing the ARP timeout as a solution.

Wouldn't that change the behavior for everything? Like a global setting?

This ARP timeout would only be triggered in case of a host is not "alive" like the raspberry pi 4b we just observed ?

stephenw10

It would be global but 1min is not that unusual. I believe Windows uses 30s.
What would happen is that every minute the RasPi4 entry in the pfSense ARP table would time out. So in order to send syslog traffic to it it will ARP for the IP address and the RasPi4 will respond to that refreshing the MAC table in the switch.
It feels like a cleaner solution to me but if the ping is working for you then there then there no need to change it. It would be interesting to know that works if you're able to test it.

Steve

mcury

@stephenw10 said in SG-3100 switch weird behavior (resolved):

It would be interesting to know that works if you're able to test it.

Sure, I'll disable the cron job and test it right now, wireshark is already running, one sec

johnpoz

@stephenw10 said in SG-3100 switch weird behavior (resolved):

I believe Windows uses 30s.

windows uses a weird way of doing it, they use 30 seconds as base and then add a random multiplier on it.. But you can adjust it if you want.

https://learn.microsoft.com/en-us/troubleshoot/windows-server/networking/address-resolution-protocol-arp-caching-behavior

Wouldn't setting a static arp for the rpi4 also solve it? Or that is different than the switch arp cache?

I wish arp in windows actually showed you what was left on the cache, like freebsd, linux should do that too. At least in linux you can use ip -statistics neigh

I don't know of any way to actually view how much time is left on mac that is cached.

mcury

@johnpoz said in SG-3100 switch weird behavior (resolved):

Wouldn't setting a static arp for the rpi4 also solve it? Or that is different than the switch arp cache?

I tried that, actually the static ARP is set right now..

mcury

@stephenw10 15 minutes and no problems..

This also works:

sysctl net.link.ether.inet.max_age=60

johnpoz

@mcury so what is better solution? More arps going out for everything ;) Or just pinging pfsense from the rpi4 every minute or 2 minutes..

Weird one for sure..

mcury

@johnpoz said in SG-3100 switch weird behavior (resolved):

so what is better solution? More arps going out for everything ;) Or just pinging pfsense from the rpi4 every minute or 2 minutes..
Weird one for sure..

ehhe, that is weird indeed.
I'm not sure how it works, but it seems that every packet that goes through the switch reset that ARP timer, so the firewall wouldn't need to broadcast it as often.

stephenw10

@johnpoz said in SG-3100 switch weird behavior (resolved):

Wouldn't setting a static arp for the rpi4 also solve it? Or that is different than the switch arp cache?

Yeah, nothing to do with the switch MAC table. That exists only in the switch IC.

So in fact I would expect setting a static ARP to make this worse because it will never expire, pfSense will never ARP for the IP so no responses will be generated.

So if it was still set static I'm surprised that max_age value made any difference.

mcury

@stephenw10 said in SG-3100 switch weird behavior (resolved):

So if it was still set static I'm surprised that max_age value made any difference.

It is set like that since the beginning, changed yesterday and the problem happened today several times..

stephenw10

Did you set that as a static ARP value to try to solve this or has it always been static?

Because static ARP entries are almost always the wrong choice. That might be the cause here if it was always set static.

Steve

mcury

@stephenw10 said in SG-3100 switch weird behavior (resolved):

Did you set that as a static ARP value to try to solve this or has it always been static?

I always use static, the problem happened, I changed a few IP addresses here and removed the static ARP, it happened a few times after that so I reverted to static ARP.

If you want, I can remove that entry to test too

stephenw10

Yeah, I would test just without the static ARP entry. If you still see the issue test with max_age at 120s again. Anything less than 3mins should prevent it.

Steve