Wireless?

stephenw10

Hmm, the data in those drop downs just comes from the ifconfig output from the NIC.
Something like:

[23.01-BETA][root@6100.stevew.lan]/root: ifconfig -m ath0_wlan0
ath0_wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: WIFI0
        ether 00:0e:8e:59:84:48
        inet6 fe80::20e:8eff:fe59:8448%ath0_wlan0 prefixlen 64 scopeid 0xe
        inet 10.200.58.1 netmask 0xffffff80 broadcast 10.200.58.127
        groups: wlan
        ssid 6100net channel 1 (2412 MHz 11g ht/40+) bssid 00:0e:8e:59:84:48
        regdomain ETSI country GB indoor ecm authmode WPA2/802.11i
        privacy MIXED deftxkey 3 AES-CCM 2:128-bit AES-CCM 3:128-bit
        txpower 30 scanvalid 60 protmode OFF ampdulimit 64k ampdudensity 8
        shortgi -uapsd wme burst -apbridge dtimperiod 1 -dfs
        parent interface: ath0
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
        status: running
        supported media:
                media MCS mode autoselect mediaopt hostap
                media MCS mode 11ng mediaopt hostap
                media autoselect mode 11ng mediaopt hostap
                media MCS mode 11na mediaopt hostap
                media autoselect mode 11na mediaopt hostap
                media DS/11Mbps mode autoselect mediaopt hostap
                media DS/5.5Mbps mode autoselect mediaopt hostap
                media DS/2Mbps mode autoselect mediaopt hostap
                media DS/1Mbps mode autoselect mediaopt hostap
                media OFDM/54Mbps mode autoselect mediaopt hostap
                media OFDM/48Mbps mode autoselect mediaopt hostap
                media OFDM/36Mbps mode autoselect mediaopt hostap
                media OFDM/24Mbps mode autoselect mediaopt hostap
                media OFDM/18Mbps mode autoselect mediaopt hostap
                media OFDM/12Mbps mode autoselect mediaopt hostap
                media OFDM/9Mbps mode autoselect mediaopt hostap
                media OFDM/6Mbps mode autoselect mediaopt hostap
                media OFDM/54Mbps mode 11g mediaopt hostap
                media OFDM/48Mbps mode 11g mediaopt hostap
                media OFDM/36Mbps mode 11g mediaopt hostap
                media OFDM/24Mbps mode 11g mediaopt hostap
                media OFDM/18Mbps mode 11g mediaopt hostap
                media OFDM/12Mbps mode 11g mediaopt hostap
                media OFDM/9Mbps mode 11g mediaopt hostap
                media OFDM/6Mbps mode 11g mediaopt hostap
                media DS/11Mbps mode 11g mediaopt hostap
                media DS/5.5Mbps mode 11g mediaopt hostap
                media DS/2Mbps mode 11g mediaopt hostap
                media DS/1Mbps mode 11g mediaopt hostap
                media autoselect mode 11g mediaopt hostap
                media DS/11Mbps mode 11b mediaopt hostap
                media DS/5.5Mbps mode 11b mediaopt hostap
                media DS/2Mbps mode 11b mediaopt hostap
                media DS/1Mbps mode 11b mediaopt hostap
                media autoselect mode 11b mediaopt hostap
                media OFDM/54Mbps mode 11a mediaopt hostap
                media OFDM/48Mbps mode 11a mediaopt hostap
                media OFDM/36Mbps mode 11a mediaopt hostap
                media OFDM/24Mbps mode 11a mediaopt hostap
                media OFDM/18Mbps mode 11a mediaopt hostap
                media OFDM/12Mbps mode 11a mediaopt hostap
                media OFDM/9Mbps mode 11a mediaopt hostap
                media OFDM/6Mbps mode 11a mediaopt hostap
                media autoselect mode 11a mediaopt hostap
                media autoselect mode autoselect mediaopt hostap
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
[23.01-BETA][root@6100.stevew.lan]/root: ifconfig ath0_wlan0 list caps
drivercaps=4f8def41<STA,FF,IBSS,PMGT,HOSTAP,AHDEMO,TXPMGT,SHSLOT,SHPREAMBLE,MONITOR,MBSS,WPA1,WPA2,BURST,WME,WDS,TXFRAG>
cryptocaps=1f<WEP,TKIP,AES,AES_CCM,TKIPMIC>
htcaps=20701ef<LDPC,CHWIDTH40,SHORTGI20,SHORTGI40,TXSTBC>
[23.01-BETA][root@6100.stevew.lan]/root: ifconfig ath0_wlan0 list chan
Channel   1 : 2412  MHz 11g ht       Channel  48 : 5240  MHz 11a ht       
Channel   2 : 2417  MHz 11g ht       Channel  52 : 5260* MHz 11a ht       
Channel   3 : 2422  MHz 11g ht       Channel  56 : 5280* MHz 11a ht       
Channel   4 : 2427  MHz 11g ht       Channel  60 : 5300* MHz 11a ht       
Channel   5 : 2432  MHz 11g ht       Channel  64 : 5320* MHz 11a ht       
Channel   6 : 2437  MHz 11g ht       Channel 100 : 5500* MHz 11a ht       
Channel   7 : 2442  MHz 11g ht       Channel 104 : 5520* MHz 11a ht       
Channel   8 : 2447  MHz 11g ht       Channel 108 : 5540* MHz 11a ht       
Channel   9 : 2452  MHz 11g ht       Channel 112 : 5560* MHz 11a ht       
Channel  10 : 2457  MHz 11g ht       Channel 116 : 5580* MHz 11a ht       
Channel  11 : 2462  MHz 11g ht       Channel 120 : 5600* MHz 11a ht       
Channel  12 : 2467  MHz 11g ht       Channel 124 : 5620* MHz 11a ht       
Channel  13 : 2472  MHz 11g ht       Channel 128 : 5640* MHz 11a ht       
Channel  36 : 5180  MHz 11a ht       Channel 132 : 5660* MHz 11a ht       
Channel  40 : 5200  MHz 11a ht       Channel 136 : 5680* MHz 11a ht       
Channel  44 : 5220  MHz 11a ht       Channel 140 : 5700* MHz 11a ht

Do you no longer see that?

Steve

LostInIgnorance

@stephenw10 said in Wireless?:

ifconfig -m ath0_wlan0

Yes, that is correct. On 22.05 the wireless adapter exists and works correctly (works as an AP). On the latest version referenced below, the wireless interface no longer exists, nor shows up in shell.

23.01-BETA (arm64)
built on Wed Jan 04 06:04:48 UTC 2023
FreeBSD 14.0-CURRENT

ifconfig -m ath0_wlan0
ifconfig: interface ath0_wlan0 does not exist

Configuring WIRELESS interface...[ar5210] loaded
[ar5211] loaded
[ar5212] loaded
[ar5416] loaded
[ar9300] loaded
[ath_rate] loaded
[ath_dfs] loaded
[ath] loaded
ifconfig: interface ath0_wlan0 does not exist

stephenw10

Ah, interesting. Does it show up in pciconf -lv?

Amy errors shown in the boot log? Perhaps the driver failing to attach?

LostInIgnorance

@stephenw10 Looks like that may be the culprit as I get no output from the command pciconf -lv

Here's the output from 22.05

/root: pciconf -lv
ath0@pci0:0:0:0:        class=0x028000 card=0x3099168c chip=0x002a168c rev=0x01 hdr=0x00
    vendor     = 'Qualcomm Atheros'
    device     = 'AR928X Wireless Network Adapter (PCI-Express)'
    class      = network

/root: ifconfig -m ath0_wlan0
ath0_wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0                                                                                                                                                              mtu 1500
        description: WIRELESS
        ether 04:f0:21:55:b6:e9
        inet6 fe80::6f0:21ff:fe55:b6e9%ath0_wlan0 prefixlen 64 scopeid 0xa
        groups: wlan
        ssid WIRELESS channel 36 (5180 MHz 11a ht/40+) bssid 04:f0:21:55:b6:e9
        regdomain FCC country US indoor ecm authmode WPA2/802.11i
        privacy MIXED deftxkey 3 AES-CCM 2:128-bit AES-CCM 3:128-bit
        txpower 17 mcastrate 6 mgmtrate 6 scanvalid 60 ampdulimit 64k
        ampdudensity 8 shortgi -ldpc -uapsd wme burst hidessid dtimperiod 1
        -dfs
        parent interface: ath0
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11na <hostap>
        status: running
        supported media:
                media MCS mode autoselect mediaopt hostap
                media MCS mode 11ng mediaopt hostap
                media autoselect mode 11ng mediaopt hostap
                media MCS mode 11na mediaopt hostap
                media autoselect mode 11na mediaopt hostap
                media DS/11Mbps mode autoselect mediaopt hostap
                media DS/5.5Mbps mode autoselect mediaopt hostap
                media DS/2Mbps mode autoselect mediaopt hostap
                media DS/1Mbps mode autoselect mediaopt hostap
                media OFDM/54Mbps mode autoselect mediaopt hostap
                media OFDM/48Mbps mode autoselect mediaopt hostap
                media OFDM/36Mbps mode autoselect mediaopt hostap
                media OFDM/24Mbps mode autoselect mediaopt hostap
                media OFDM/18Mbps mode autoselect mediaopt hostap
                media OFDM/12Mbps mode autoselect mediaopt hostap
                media OFDM/9Mbps mode autoselect mediaopt hostap
                media OFDM/6Mbps mode autoselect mediaopt hostap
                media OFDM/54Mbps mode 11g mediaopt hostap
                media OFDM/48Mbps mode 11g mediaopt hostap
                media OFDM/36Mbps mode 11g mediaopt hostap
                media OFDM/24Mbps mode 11g mediaopt hostap
                media OFDM/18Mbps mode 11g mediaopt hostap
                media OFDM/12Mbps mode 11g mediaopt hostap
                media OFDM/9Mbps mode 11g mediaopt hostap
                media OFDM/6Mbps mode 11g mediaopt hostap
                media DS/11Mbps mode 11g mediaopt hostap
                media DS/5.5Mbps mode 11g mediaopt hostap
                media DS/2Mbps mode 11g mediaopt hostap
                media DS/1Mbps mode 11g mediaopt hostap
                media autoselect mode 11g mediaopt hostap
                media DS/11Mbps mode 11b mediaopt hostap
                media DS/5.5Mbps mode 11b mediaopt hostap
                media DS/2Mbps mode 11b mediaopt hostap
                media DS/1Mbps mode 11b mediaopt hostap
                media autoselect mode 11b mediaopt hostap
                media OFDM/54Mbps mode 11a mediaopt hostap
                media OFDM/48Mbps mode 11a mediaopt hostap
                media OFDM/36Mbps mode 11a mediaopt hostap
                media OFDM/24Mbps mode 11a mediaopt hostap
                media OFDM/18Mbps mode 11a mediaopt hostap
                media OFDM/12Mbps mode 11a mediaopt hostap
                media OFDM/9Mbps mode 11a mediaopt hostap
                media OFDM/6Mbps mode 11a mediaopt hostap
                media autoselect mode 11a mediaopt hostap
                media autoselect mode autoselect mediaopt hostap
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

stephenw10

If it doesn't even show up as a 'none' entry then it's probably some issue with the bus/host device.

Do you actually see no output from pciconf? That would also imply the PCIe subsystem has not been recognised.

I now see you're running arm64 though, is that a 2100?

LostInIgnorance

@stephenw10 I am running the 1100 and yes there is nothing that shows up with the PCI command

stephenw10

Yes, OK. I've replicated that and opened a ticket internally. The PCIe device appears to me missing at boot.

LostInIgnorance

@stephenw10 Can you let me know when this has been merged upstream and I may begin testing again? Is there a redmine I can track?

stephenw10

Currently it's only on our internal tracker. There's no fix yet so nothing has been merged.

Steve

LostInIgnorance

@stephenw10 Do you know if the missing PCI has been pushed and I can test again?

stephenw10

No fix yet. Unfortunately it's low priority as very few users actually make use of the PCIe slot.

It may have to be pushed to the 23.05 release.

Steve