sg-2100 & adding/assigning vpn interfaces

[BxuEyE4]

initial configuration of sg-2100 22.05-RELEASE (arm64) .

i'm setting up this 2100 and now at the stage to assign a few interfaces for VPNs. thing is, i don't see an <ADD> button on the Interface Assignments page to add additional interfaces.

does the openvpn package need to be installed before the [optX | ovpncX] interfaces are available to add?

[FSC830]

Sure, no add button?

Here is a screenshot from my SG-3100, no need to install any additional package.

Regards

[BxuEyE4]

@fsc830

here is my sg2400

here is the new sg2100. shows only wan & lan, no add button

i'm fairly certain the sg2100 has this capability. i'm scratching my head as to what to do to get that to display.

tia

[FSC830]

Create a ticket at TAC support and request a link for an recovery image and re-install the SG-2100.
Thats would be my choice.

Regards

[BxuEyE4]

@fsc830

wilco. thanks!

[stephenw10]

The 'Add' button only shows if there are available unassigned interfaces to add. So you won't see it until you have created for OpenVPN clients or servers that you can assign.

Steve

[rcoleman-netgate]

@bxueye4 said in sg-2100 & adding/assigning vpn interfaces:

i'm fairly certain the sg2100 has this capability. i'm scratching my head as to what to do to get that to display.

Also recommend reading up on the switch: https://docs.netgate.com/pfsense/en/latest/solutions/netgate-2100/switch-overview.html

[BxuEyE4]

@stephenw10 said in sg-2100 & adding/assigning vpn interfaces:

The 'Add' button only shows if there are available unassigned interfaces to add. So you won't see it until you have created for OpenVPN clients or servers that you can assign.

Steve

tac pointed this out too. i had forgotten the order of steps. appreciate your help.

[BxuEyE4]

@rcoleman-netgate said in sg-2100 & adding/assigning vpn interfaces:

@bxueye4 said in sg-2100 & adding/assigning vpn interfaces:

i'm fairly certain the sg2100 has this capability. i'm scratching my head as to what to do to get that to display.

Also recommend reading up on the switch: https://docs.netgate.com/pfsense/en/latest/solutions/netgate-2100/switch-overview.html

good reminder. lol thanks