Onboard NIC doesn't show up Killer E3100

[sef1414]

I am trying to get an onboard NIC to show up so that I have a third interface, but it doesn't get recognized by default.

When I list PCI devices I can see it without a driver:

none4@pci0:59:0:0:	class=0x020000 rev=0x06 hdr=0x00 vendor=0x10ec device=0x3000 subvendor=0x1849 subdevice=0x3000
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'Killer E3000 2.5GbE Controller'
    class      = network
    subclass   = ethernet
    bar   [10] = type I/O Port, range 32, base 0x3000, size 256, enabled
    bar   [18] = type Memory, range 64, base 0x6a400000, size 65536, enabled
    bar   [20] = type Memory, range 64, base 0x6a410000, size 16384, enabled

I followed another forum and installed the latest FreeBSD Realtek driver

fetch -v https://pkg.freebsd.org/FreeBSD:12:amd64/latest/All/realtek-re-kmod-197.00.pkg
pkg install -f -y realtek-re-kmod-197.00.pkg

And then created a /boot/loader.conf.local file containing:

if_re_load="YES"
if_re_name="/boot/modules/if_re.ko"

However, it is still not showing up. I'm wondering if this is the right driver, or if potentially the interface name is different so boot loader config should be different. Any ideas would be appreciated.

Here is the dmesg.boot log:

Copyright (c) 1992-2022 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #0 devel-main-n255825-17d2b04a49e: Thu Jan 12 23:20:55 UTC 2023
    root@freebsd:/var/jenkins/workspace/pfSense-CE-snapshots-master-main/obj/amd64/6jmcE0HR/var/jenkins/workspace/pfSense-CE-snapshots-master-main/sources/FreeBSD-src-devel-main/amd64.amd64/sys/pfSense amd64
FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 800x600
CPU: 12th Gen Intel(R) Core(TM) i5-12600K (3686.40-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x90672  Family=0x6  Model=0x97  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA>
  Structured Extended Features2=0x98c027bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,TME,RDPID,MOVDIRI,MOVDIR64B>
  Structured Extended Features3=0xfc1cc410<FSRM,MD_CLEAR,PCONFIG,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0xfd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16248598528 (15495 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: Non-uniform topology
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 15 14 13 3 12 7 11 6 9 5 2 10 8 4
TCP_ratelimit: Is now initialized
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80760a60, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80760b10, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80760bc0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8077dba0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8077dc50, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8077dd00, 0) error 1
wlan: mac acl policy registered
random: entropy device external interface
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x45bae000-0x45bae01e
smbios0: Version: 3.5, BCD Revision: 3.5
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 350
Event timer "HPET1" frequency 19200000 Hz quality 340
Event timer "HPET2" frequency 19200000 Hz quality 340
Event timer "HPET3" frequency 19200000 Hz quality 340
Event timer "HPET4" frequency 19200000 Hz quality 340
Event timer "HPET5" frequency 19200000 Hz quality 340
Event timer "HPET6" frequency 19200000 Hz quality 340
Event timer "HPET7" frequency 19200000 Hz quality 340
atrtc1: <AT realtime clock> on acpi0
atrtc1: Warning: Couldn't map I/O.
atrtc1: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ix0: <Intel(R) X550-T2> mem 0x6022800000-0x6022bfffff,0x6022c04000-0x6022c07fff at device 0.0 on pci1
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: queue equality override not set, capping rx_queues at 10 and tx_queues at 10
ix0: Using 10 RX queues 10 TX queues
ix0: Using MSI-X interrupts with 11 vectors
ix0: allocated for 10 queues
ix0: allocated for 10 rx queues
ix0: Ethernet address: b4:96:91:72:04:9c
ix0: PCI Express Bus: Speed 8.0GT/s Width x1
ix0: Option ROM V19-b5-p12 eTrack 0x80000f32 PHY FW V523
ix0: Error 2 setting up SR-IOV
ix0: netmap queues/slots: TX 10/2048, RX 10/2048
ix1: <Intel(R) X550-T2> mem 0x6022400000-0x60227fffff,0x6022c00000-0x6022c03fff at device 0.1 on pci1
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: queue equality override not set, capping rx_queues at 10 and tx_queues at 10
ix1: Using 10 RX queues 10 TX queues
ix1: Using MSI-X interrupts with 11 vectors
ix1: allocated for 10 queues
ix1: allocated for 10 rx queues
ix1: Ethernet address: b4:96:91:72:04:9e
ix1: PCI Express Bus: Speed 8.0GT/s Width x1
ix1: Option ROM V19-b5-p12 eTrack 0x80000f32 PHY FW V523
ix1: Error 2 setting up SR-IOV
ix1: netmap queues/slots: TX 10/2048, RX 10/2048
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0x6023000000-0x6023ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0
vgapci0: Boot video device
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
nvme0: <Generic NVMe Device> mem 0x6a500000-0x6a503fff at device 0.0 on pci2
xhci0: <Intel Alder Lake USB 3.2 controller> mem 0x6024100000-0x602410ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <network> at device 20.3 (no driver attached)
pci0: <serial bus> at device 21.0 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel Alder Lake AHCI SATA controller> port 0x4090-0x4097,0x4080-0x4083,0x4060-0x407f mem 0x6a700000-0x6a701fff,0x6a703000-0x6a7030ff,0x6a702000-0x6a7027ff at device 23.0 on pci0
ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib3: <ACPI PCI-PCI bridge> at device 27.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib5
pci5: <serial bus, USB> at device 0.0 (no driver attached)
pcib6: <PCI-PCI bridge> at device 1.0 on pci4
pcib7: <ACPI PCI-PCI bridge> at device 2.0 on pci4
pci6: <ACPI PCI bus> on pcib7
xhci1: <XHCI (generic) USB 3.0 controller> mem 0x6a200000-0x6a20ffff at device 0.0 on pci6
xhci1: 32 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib8: <PCI-PCI bridge> at device 3.0 on pci4
pcib9: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci7: <ACPI PCI bus> on pcib9
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib10: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci8: <ACPI PCI bus> on pcib10
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac0: <Intel Alder Lake HDA Controller> mem 0x6024110000-0x6024113fff,0x6024000000-0x60240fffff at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
atrtc0: Can't map interrupt.
hwpstate_intel0: <Intel Speed Shift> on cpu0
hwpstate_intel1: <Intel Speed Shift> on cpu1
hwpstate_intel2: <Intel Speed Shift> on cpu2
hwpstate_intel3: <Intel Speed Shift> on cpu3
hwpstate_intel4: <Intel Speed Shift> on cpu4
hwpstate_intel5: <Intel Speed Shift> on cpu5
hwpstate_intel6: <Intel Speed Shift> on cpu6
hwpstate_intel7: <Intel Speed Shift> on cpu7
hwpstate_intel8: <Intel Speed Shift> on cpu8
hwpstate_intel9: <Intel Speed Shift> on cpu9
hwpstate_intel10: <Intel Speed Shift> on cpu10
hwpstate_intel11: <Intel Speed Shift> on cpu11
hwpstate_intel12: <Intel Speed Shift> on cpu12
hwpstate_intel13: <Intel Speed Shift> on cpu13
hwpstate_intel14: <Intel Speed Shift> on cpu14
hwpstate_intel15: <Intel Speed Shift> on cpu15
Timecounter "TSC-low" frequency 1843201907 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen1.1: <Intel XHCI root HUB> at usbus1
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 on usbus1
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1 on usbus0
uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvd0: <Samsung SSD 980 PRO 500GB> NVMe namespace
nvd0: 476940MB (976773168 512 byte sectors)
hdacc0: <Realtek ALC1220 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC1220 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC1220 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0
pcm1: <Realtek ALC1220 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC1220 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Alder Lake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Alder Lake Audio Function Group> at nid 1 on hdacc1
pcm3: <Intel Alder Lake (HDMI/DP 8ch)> at nid 4 on hdaa1
Trying to mount root from zfs:pfSense2/ROOT/default []...
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 4 ports with 4 removable, self powered
uhub1: 25 ports with 25 removable, self powered
Root mount waiting for: usbus0 CAM
ugen0.2: <SEM USB Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0
kbd2 at ukbd0
uhid0 on uhub1
uhid0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0
ugen0.3: <vendor 0x04b3 USB Optical Mouse> at usbus0
Root mount waiting for: usbus0 CAM
ugen0.4: <ASRock LED Controller> at usbus0
uhid1 on uhub1
uhid1: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 3> on usbus0
ugen0.5: <vendor 0x8087 product 0x0033> at usbus0
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
Dual Console: Serial Primary, Video Secondary
CPU: 12th Gen Intel(R) Core(TM) i5-12600K (3686.40-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x90672  Family=0x6  Model=0x97  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA>
  Structured Extended Features2=0x98c027bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,TME,RDPID,MOVDIRI,MOVDIR64B>
  Structured Extended Features3=0xfc1cc410<FSRM,MD_CLEAR,PCONFIG,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x88fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics

[stephenw10]

@sef1414 said in Onboard NIC doesn't show up Killer E3100:

realtek-re-kmod-197.00.pkg

Even the most recent version that driver, 198.00, doesn't support that device ID:

/*
 * General constants that are fun to know.
 *
 * RealTek PCI vendor ID
 */
#define	RT_VENDORID				0x10EC

/*
 * RealTek chip device IDs.
 */
#define RT_DEVICEID_8129			0x8129
#define RT_DEVICEID_8139			0x8139
#define RT_DEVICEID_8169			0x8169		/* For RTL8169 */
#define RT_DEVICEID_8169SC			0x8167		/* For RTL8169SC */
#define RT_DEVICEID_8168			0x8168		/* For RTL8168B */
#define RT_DEVICEID_8161			0x8161		/* For RTL8168 Series add-on card */
#define RT_DEVICEID_8162			0x8162		/* For RTL8168KB */
#define RT_DEVICEID_8136			0x8136		/* For RTL8101E */
#define RT_DEVICEID_8125			0x8125		/* For RTL8125 */

/*
 * Accton PCI vendor ID
 */
#define ACCTON_VENDORID				0x1113

/*
 * Accton MPX 5030/5038 device ID.
 */
#define ACCTON_DEVICEID_5030			0x1211

/*
 * Delta Electronics Vendor ID.
 */
#define DELTA_VENDORID				0x1500

/*
 * Delta device IDs.
 */
#define DELTA_DEVICEID_8139			0x1360

/*
 * Addtron vendor ID.
 */
#define ADDTRON_VENDORID			0x4033

/*
 * Addtron device IDs.
 */
#define ADDTRON_DEVICEID_8139			0x1360

/*
 * D-Link vendor ID.
 */
#define DLINK_VENDORID				0x1186

/*
 * D-Link DFE-530TX+ device ID
 */
#define DLINK_DEVICEID_530TXPLUS		0x1300

So some coding required to make it work.

Steve

[sef1414]

@stephenw10 said in Onboard NIC doesn't show up Killer E3100:

So some coding required to make it work.

Alright, thanks for helping me put that issue to rest, appreciate it.

[Dobby_]

@sef1414 said in Onboard NIC doesn't show up Killer E3100:

@stephenw10 said in Onboard NIC doesn't show up Killer E3100:

So some coding required to make it work.

Alright, thanks for helping me put that issue to rest, appreciate it.

May be you give it a shot and try it out now?
Killer E3000/E3100 NIC

[stephenw10]

Yes, looks like it should be supported in 198.00_1.