Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    23.01.b.20230106.0600 IGMP proxy stops TV stream

    General pfSense Questions
    18
    139
    41.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      thebear @stephenw10
      last edited by

      @stephenw10 yes it is disabled and still showing. Some other locals pointed me also towards this setting, but it did not change.

      Please note that the STB was unable to deliver IGMP joins to pfSense due to a wrong multicast IGMP snooping on the switch.

      My main concern left is that pfSense 23.01beta seems to be having trouble forwarding this multicast data and the TV starts to stutter and drops channel. Could that be a driver issue with the intel i226v?

      86188a0a-2616-4e84-a101-ac3170d3f44d-image.png

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Possibly but I would suspect an issue in IGMPproxy first.

        Did this same hardware and config work as expected in 22.05?

        T 1 Reply Last reply Reply Quote 0
        • T
          thebear @stephenw10
          last edited by

          @stephenw10 said in 23.01.b.20230106.0600 IGMP proxy stops TV stream:

          Possibly but I would suspect an issue in IGMPproxy first.

          Did this same hardware and config work as expected in 22.05?

          yes was watching TV every night. From my latest research it seems the igmp joins are transported correctly between wan and stb-lan. But then the stream got issues and drops.

          Any way to check the igmp-proxy version between 22.05 and 23.01? Does the version number got changed for the proxy software?

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            The pkg version is the same between 22.05 and 23.01:

            [23.01-RC][root@6100.stevew.lan]/root: pkg info -x igmp
igmpproxy-0.3,1

            Do you see any traffic blocked?

            Troubleshooting he igmpproxy is.... painful!

            You can enable verbose logging in the gui settings but my experience with that has been limited.

            The only way to get any real information from it is to stop the service in the gui then start it at the CLI in verbose mode:

            [22.05.1-RELEASE][root@8200-2.stevew.lan]/root: igmpproxy -d -vv /var/etc/igmpproxy.conf
Searching for config file at '/var/etc/igmpproxy.conf'
Config: Quick leave mode enabled.
Config: Got a phyint token.
Config: IF: Config for interface ix3.
Config: IF: Got upstream token.
Config: IF: Got ratelimit token '0'.
Config: IF: Got threshold token '1'.
Config: IF: Got altnet token 224.0.0.0/8.
Config: IF: Altnet: Parsed altnet to 224/8.
IF name : ix3
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 1
Allowednet ptr : 649000
Config: Got a phyint token.
Config: IF: Config for interface igc0.
Config: IF: Got downstream token.
Config: IF: Got ratelimit token '0'.
Config: IF: Got threshold token '1'.
Config: IF: Got altnet token 192.168.92.0/24.
Config: IF: Altnet: Parsed altnet to 192.168.92/24.
IF name : igc0
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 2
Allowednet ptr : 649010
Config: Got a phyint token.
Config: IF: Config for interface ix2.
Config: IF: Got disabled token.
IF name : ix2
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface ix0.
Config: IF: Got disabled token.
IF name : ix0
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface ix1.
Config: IF: Got disabled token.
IF name : ix1
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface igc1.
Config: IF: Got disabled token.
IF name : igc1
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface igc2.
Config: IF: Got disabled token.
IF name : igc2
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface igc3.
Config: IF: Got disabled token.
IF name : igc3
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
buildIfVc: Interface igc0 Addr: 192.168.92.1, Flags: 0xffff8843, Network: 192.168.92/24
buildIfVc: Interface ix3 Addr: 172.21.16.92, Flags: 0xffff8843, Network: 172.21.16/24
buildIfVc: Interface lo0 Addr: 127.0.0.1, Flags: 0xffff8049, Network: 127/8
Found config for igc0
Found config for ix3
adding VIF, Ix 0 Fl 0x0 IP 0x015ca8c0 igc0, Threshold: 1, Ratelimit: 0
        Network for [igc0] : 192.168.92/24
        Network for [igc0] : 192.168.92/24
Found upstrem IF #0, will assing as upstream Vif 18
adding VIF, Ix 1 Fl 0x0 IP 0x5c1015ac ix3, Threshold: 1, Ratelimit: 0
        Network for [ix3] : 172.21.16/24
        Network for [ix3] : 224/8
Got 262144 byte buffer size in 0 iterations
Joining all-routers group 224.0.0.2 on vif 192.168.92.1
Joining group 224.0.0.2 on interface igc0
Joining all igmpv3 multicast routers group 224.0.0.22 on vif 192.168.92.1
Joining group 224.0.0.22 on interface igc0
Sender VIF was down.; Errno(50): Network is down

            That will give you a lot of information which isn't all that helpful but if you can log the output across a stream failure it might show you what's happening.

            Steve

            T 1 Reply Last reply Reply Quote 0
            • T
              thebear @stephenw10
              last edited by thebear

              @stephenw10 said in 23.01.b.20230106.0600 IGMP proxy stops TV stream:

              igmpproxy -d -vv /var/etc/igmpproxy.conf

              Morning @stephenw10 no traffic blocked confirmed by the stream which is build op in multicast. It's quite a smart STB, it starts in unicast to fake fast channel switching. And then it seamless transfers to multicast.

              I think it might still related to IGMP-proxy as you suspect, there are to less igmp joins from the STB processed. And the proxy is aging out the old routes. The stream was stuttering a the end of the capture, I think due to igmp joins missing/being processed correctly. After a few sec the stream is build op again, the STB tries that 2 times and then trows an error on the screen.

              (Id:11, Time:115)
About to call timeout 10 (#0)
Aging routes in table.
Removing group 224.0.251.133. Died of old age.
Removed route entry for 224.0.251.133 from table.
Vif bits : 0x00000001

              • pfSense after 30 seconds the igmp-proxy decides there are no listeners anymore because the IGMP-joins are not seen. (captured on the pfSense web GUI tcpdump)

              • Provider modem, every 10 seconds is the igmp join from the STB processed. So indeed the died of old age message is true because the proxy is unable to catch all the igmp joins.

              Below the full log and the full igmp capture at the same time taken on the LAN interface.

              2aecc495-75d1-43fd-8e4e-606398e39efe-day2.png pfSense capture

              adding VIF, Ix 0 Fl 0x0 IP 0x011b10ac igc2, Threshold: 1, Ratelimit: 0
        Network for [igc2] : 172.16.27/24
        Network for [igc2] : 172.16.27/24
Found upstrem IF #0, will assing as upstream Vif 52
adding VIF, Ix 1 Fl 0x0 IP 0x2738ee0a igc1.4, Threshold: 1, Ratelimit: 0
        Network for [igc1.4] : 10.238.56/22
        Network for [igc1.4] : 0/1
        Network for [igc1.4] : 128/1
adding VIF, Ix 2 Fl 0x0 IP 0x011a10ac igc0.26, Threshold: 1, Ratelimit: 0
        Network for [igc0.26] : 172.16.26/24
        Network for [igc0.26] : 172.16.26/24
Got 262144 byte buffer size in 0 iterations
Joining all-routers group 224.0.0.2 on vif 172.16.27.1
Joining group 224.0.0.2 on interface igc2
Joining all igmpv3 multicast routers group 224.0.0.22 on vif 172.16.27.1
Joining group 224.0.0.22 on interface igc2
Joining all-routers group 224.0.0.2 on vif 172.16.26.1
Joining group 224.0.0.2 on interface igc0.26
Joining all igmpv3 multicast routers group 224.0.0.22 on vif 172.16.26.1
Joining group 224.0.0.22 on interface igc0.26
SENT Membership query   from 172.16.27.1     to 224.0.0.1
Sent membership query from 172.16.27.1 to 224.0.0.1. Delay: 10
SENT Membership query   from 172.16.26.1     to 224.0.0.1
Sent membership query from 172.16.26.1 to 224.0.0.1. Delay: 10
Created timeout 1 (#0) - delay 10 secs
(Id:1, Time:10)
Created timeout 2 (#1) - delay 21 secs
(Id:1, Time:10)
(Id:2, Time:21)
RECV V3 member report   from 172.16.26.1     to 224.0.0.22
The IGMP message was from myself. Ignoring.
The IGMP message was from myself. Ignoring.
RECV V3 member report   from 172.16.27.1     to 224.0.0.22
The IGMP message was from myself. Ignoring.
The IGMP message was from myself. Ignoring.
RECV V3 member report   from 172.16.27.1     to 224.0.0.22
The IGMP message was from myself. Ignoring.
The IGMP message was from myself. Ignoring.
RECV V3 member report   from 172.16.26.1     to 224.0.0.22
The IGMP message was from myself. Ignoring.
The IGMP message was from myself. Ignoring.
RECV Leave message      from 172.16.27.10    to 224.0.0.2
Got leave message from 172.16.27.10 to 224.0.251.133. Starting last member detection.
Created timeout 3 (#1) - delay 2 secs
(Id:1, Time:8)
(Id:3, Time:2)
(Id:2, Time:19)
RECV Leave message      from 172.16.27.10    to 224.0.0.2
Got leave message from 172.16.27.10 to 224.0.0.199. Starting last member detection.
Created timeout 4 (#2) - delay 1 secs
(Id:1, Time:7)
(Id:3, Time:2)
(Id:4, Time:1)
(Id:2, Time:18)
RECV V2 member report   from 172.16.27.10    to 224.0.0.199
Should insert group 224.0.0.199 (from: 172.16.27.10) to route table. Vif Ix : 0
No existing route for 224.0.0.199. Create new.
No routes in table. Insert at beginning.
Inserted route table entry for 224.0.0.199 on VIF #0
Joining group 224.0.0.199 upstream on IF address 10.238.56.39
Joining group 224.0.0.199 on interface igc1.4

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 224.0.0.199, Age:2, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
RECV V3 member report   from 10.238.56.39    to 224.0.0.22
The IGMP message was from myself. Ignoring.
RECV V2 member report   from 172.16.27.10    to 224.0.0.199
Should insert group 224.0.0.199 (from: 172.16.27.10) to route table. Vif Ix : 0
Updated route entry for 224.0.0.199 on VIF #0

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 224.0.0.199, Age:2, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
RECV V3 member report   from 10.238.56.39    to 224.0.0.22
The IGMP message was from myself. Ignoring.
RECV Leave message      from 172.16.27.10    to 224.0.0.2
Got leave message from 172.16.27.10 to 224.0.0.199. Starting last member detection.
counted 1 interfaces
quickleave is enabled and this was the last downstream host, leaving group 224.0.0.199 now
Leaving group 224.0.0.199 upstream on IF address 10.238.56.39
Leaving group 224.0.0.199 on interface igc1.4
Interface id 0 is in group $d
SENT Membership query   from 172.16.27.1     to 224.0.0.199
Sent membership query from 172.16.27.1 to 224.0.0.199. Delay: 10
Interface id 2 is in group $d
Created timeout 5 (#3) - delay 1 secs
(Id:1, Time:6)
(Id:3, Time:2)
(Id:4, Time:1)
(Id:5, Time:1)
(Id:2, Time:17)
RECV V2 member report   from 172.16.27.10    to 224.0.0.199
Should insert group 224.0.0.199 (from: 172.16.27.10) to route table. Vif Ix : 0
Updated route entry for 224.0.0.199 on VIF #0
Joining group 224.0.0.199 upstream on IF address 10.238.56.39
Joining group 224.0.0.199 on interface igc1.4

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 224.0.0.199, Age:2, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
The IGMP message was local multicast. Ignoring.
About to call timeout 1 (#0)
Aging routes in table.

Current routing table (Age active routes):
-----------------------------------------------------
#0: Dst: 224.0.0.199, Age:2, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
RECV V2 member report   from 172.16.27.10    to 224.0.251.133
Should insert group 224.0.251.133 (from: 172.16.27.10) to route table. Vif Ix : 0
No existing route for 224.0.251.133. Create new.
Found existing routes. Find insert location.
Inserting at beginning, before route 224.0.0.199
Inserted route table entry for 224.0.251.133 on VIF #0
Joining group 224.0.251.133 upstream on IF address 10.238.56.39
Joining group 224.0.251.133 on interface igc1.4

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 224.0.251.133, Age:2, St: I, OutVifs: 0x00000001, dHosts: yes
#1: Dst: 224.0.0.199, Age:2, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
RECV V3 member report   from 10.238.56.39    to 224.0.0.22
The IGMP message was from myself. Ignoring.
Route activate request from 217.166.225.133 to 224.0.251.133 on VIF[1]
Vif bits : 0x00000001
Setting TTL for Vif 0 to 1
Adding MFC: 217.166.225.133 -> 224.0.251.133, InpVIf: 1

Current routing table (Activate Route):
-----------------------------------------------------
#0: Src0: 217.166.225.133, Dst: 224.0.251.133, Age:2, St: A, OutVifs: 0x00000001, dHosts: yes
#1: Dst: 224.0.0.199, Age:2, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
RECV V2 member report   from 172.16.27.10    to 224.0.251.133
Should insert group 224.0.251.133 (from: 172.16.27.10) to route table. Vif Ix : 0
Updated route entry for 224.0.251.133 on VIF #0
Vif bits : 0x00000001
Setting TTL for Vif 0 to 1
Adding MFC: 217.166.225.133 -> 224.0.251.133, InpVIf: 1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Src0: 217.166.225.133, Dst: 224.0.251.133, Age:2, St: A, OutVifs: 0x00000001, dHosts: yes
#1: Dst: 224.0.0.199, Age:2, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
RECV V3 member report   from 10.238.56.39    to 224.0.0.22
The IGMP message was from myself. Ignoring.
RECV V2 member report   from 172.16.27.10    to 224.0.251.133
Should insert group 224.0.251.133 (from: 172.16.27.10) to route table. Vif Ix : 0
Updated route entry for 224.0.251.133 on VIF #0
Vif bits : 0x00000001
Setting TTL for Vif 0 to 1
Adding MFC: 217.166.225.133 -> 224.0.251.133, InpVIf: 1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Src0: 217.166.225.133, Dst: 224.0.251.133, Age:2, St: A, OutVifs: 0x00000001, dHosts: yes
#1: Dst: 224.0.0.199, Age:2, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
About to call timeout 3 (#0)
About to call timeout 4 (#0)
About to call timeout 5 (#0)
RECV V2 member report   from 172.16.27.10    to 224.0.0.199
Should insert group 224.0.0.199 (from: 172.16.27.10) to route table. Vif Ix : 0
Updated route entry for 224.0.0.199 on VIF #0

Current routing table (Insert Route):
-----------------------------------------------------
#0: Src0: 217.166.225.133, Dst: 224.0.251.133, Age:2, St: A, OutVifs: 0x00000001, dHosts: yes
#1: Dst: 224.0.0.199, Age:2, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
RECV V2 member report   from 172.16.27.10    to 224.0.0.199
Should insert group 224.0.0.199 (from: 172.16.27.10) to route table. Vif Ix : 0
Updated route entry for 224.0.0.199 on VIF #0

Current routing table (Insert Route):
-----------------------------------------------------
#0: Src0: 217.166.225.133, Dst: 224.0.251.133, Age:2, St: A, OutVifs: 0x00000001, dHosts: yes
#1: Dst: 224.0.0.199, Age:2, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
About to call timeout 2 (#0)
SENT Membership query   from 172.16.27.1     to 224.0.0.1
Sent membership query from 172.16.27.1 to 224.0.0.1. Delay: 10
SENT Membership query   from 172.16.26.1     to 224.0.0.1
Sent membership query from 172.16.26.1 to 224.0.0.1. Delay: 10
Created timeout 6 (#0) - delay 10 secs
(Id:6, Time:10)
Created timeout 7 (#1) - delay 21 secs
(Id:6, Time:10)
(Id:7, Time:21)
About to call timeout 6 (#0)
Aging routes in table.

Current routing table (Age active routes):
-----------------------------------------------------
#0: Src0: 217.166.225.133, Dst: 224.0.251.133, Age:2, St: A, OutVifs: 0x00000001, dHosts: yes
#1: Dst: 224.0.0.199, Age:2, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
About to call timeout 7 (#0)
SENT Membership query   from 172.16.27.1     to 224.0.0.1
Sent membership query from 172.16.27.1 to 224.0.0.1. Delay: 10
SENT Membership query   from 172.16.26.1     to 224.0.0.1
Sent membership query from 172.16.26.1 to 224.0.0.1. Delay: 10
Created timeout 8 (#0) - delay 10 secs
(Id:8, Time:10)
Created timeout 9 (#1) - delay 115 secs
(Id:8, Time:10)
(Id:9, Time:115)
About to call timeout 8 (#0)
Aging routes in table.

Current routing table (Age active routes):
-----------------------------------------------------
#0: Src0: 217.166.225.133, Dst: 224.0.251.133, Age:1, St: A, OutVifs: 0x00000001, dHosts: yes
#1: Dst: 224.0.0.199, Age:1, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
About to call timeout 9 (#0)
SENT Membership query   from 172.16.27.1     to 224.0.0.1
Sent membership query from 172.16.27.1 to 224.0.0.1. Delay: 10
SENT Membership query   from 172.16.26.1     to 224.0.0.1
Sent membership query from 172.16.26.1 to 224.0.0.1. Delay: 10
Created timeout 10 (#0) - delay 10 secs
(Id:10, Time:10)
Created timeout 11 (#1) - delay 115 secs
(Id:10, Time:10)
(Id:11, Time:115)
About to call timeout 10 (#0)
Aging routes in table.
Removing group 224.0.251.133. Died of old age.
Removed route entry for 224.0.251.133 from table.
Vif bits : 0x00000001
Setting TTL for Vif 0 to 1
Removing MFC: 217.166.225.133 -> 224.0.251.133, InpVIf: 1
Leaving group 224.0.251.133 upstream on IF address 10.238.56.39
Leaving group 224.0.251.133 on interface igc1.4

Current routing table (Remove route):
-----------------------------------------------------
#0: Dst: 224.0.0.199, Age:1, St: I, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
Removing group 224.0.0.199. Died of old age.
Removed route entry for 224.0.0.199 from table.
Leaving group 224.0.0.199 upstream on IF address 10.238.56.39
Leaving group 224.0.0.199 on interface igc1.4

Current routing table (Remove route):
-----------------------------------------------------
No routes in table...
-----------------------------------------------------

Current routing table (Age active routes):
-----------------------------------------------------
No routes in table...
-----------------------------------------------------
Route activate request from 217.166.225.133 to 224.0.251.133 on VIF[1]
No table entry for 224.0.251.133 [From: 217.166.225.133]. Inserting route.
No existing route for 224.0.251.133. Create new.
No routes in table. Insert at beginning.
Inserted route table entry for 224.0.251.133 on VIF #-1
No downstream listeners for group 224.0.251.133. No join sent.

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 224.0.251.133, Age:2, St: I, OutVifs: 0x00000000, dHosts: yes
-----------------------------------------------------

Current routing table (Activate Route):
-----------------------------------------------------
#0: Src0: 217.166.225.133, Dst: 224.0.251.133, Age:2, St: A, OutVifs: 0x00000000, dHosts: yes
-----------------------------------------------------
RECV V3 member report   from 10.238.56.39    to 224.0.0.22
Got leave message from 10.238.56.39 to 224.0.251.133. Starting last member detection.
The found if for 10.238.56.39 was not downstream. Ignoring leave request.
RECV V3 member report   from 10.238.56.39    to 224.0.0.22
Got leave message from 10.238.56.39 to 224.0.251.133. Starting last member detection.
The found if for 10.238.56.39 was not downstream. Ignoring leave request.
About to call timeout 11 (#0)
SENT Membership query   from 172.16.27.1     to 224.0.0.1
Sent membership query from 172.16.27.1 to 224.0.0.1. Delay: 10
SENT Membership query   from 172.16.26.1     to 224.0.0.1
Sent membership query from 172.16.26.1 to 224.0.0.1. Delay: 10
Created timeout 12 (#0) - delay 10 secs
(Id:12, Time:10)
Created timeout 13 (#1) - delay 115 secs
(Id:12, Time:10)
(Id:13, Time:115)
About to call timeout 12 (#0)
Aging routes in table.

Current routing table (Age active routes):
-----------------------------------------------------
#0: Src0: 217.166.225.133, Dst: 224.0.251.133, Age:1, St: A, OutVifs: 0x00000000, dHosts: yes
-----------------------------------------------------
RECV Leave message      from 172.16.27.10    to 224.0.0.2
Got leave message from 172.16.27.10 to 224.0.251.133. Starting last member detection.
Interface id 0 is in group $d
Interface id 2 is in group $d
Created timeout 14 (#0) - delay 10 secs
(Id:14, Time:10)
(Id:13, Time:105)
About to call timeout 14 (#0)
RECV V2 member report   from 172.16.27.10    to 224.0.251.133
Should insert group 224.0.251.133 (from: 172.16.27.10) to route table. Vif Ix : 0
Updated route entry for 224.0.251.133 on VIF #0
Vif bits : 0x00000001
Setting TTL for Vif 0 to 1
Adding MFC: 217.166.225.133 -> 224.0.251.133, InpVIf: 1
Joining group 224.0.251.133 upstream on IF address 10.238.56.39
Joining group 224.0.251.133 on interface igc1.4

Current routing table (Insert Route):
-----------------------------------------------------
#0: Src0: 217.166.225.133, Dst: 224.0.251.133, Age:1, St: A, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
RECV V3 member report   from 10.238.56.39    to 224.0.0.22
The IGMP message was from myself. Ignoring.
RECV V3 member report   from 10.238.56.39    to 224.0.0.22
The IGMP message was from myself. Ignoring.
RECV V2 member report   from 172.16.27.10    to 224.0.251.133
Should insert group 224.0.251.133 (from: 172.16.27.10) to route table. Vif Ix : 0
Updated route entry for 224.0.251.133 on VIF #0
Vif bits : 0x00000001
Setting TTL for Vif 0 to 1
Adding MFC: 217.166.225.133 -> 224.0.251.133, InpVIf: 1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Src0: 217.166.225.133, Dst: 224.0.251.133, Age:1, St: A, OutVifs: 0x00000001, dHosts: yes
-----------------------------------------------------
^Cselect() failure; Errno(4): Interrupted system call
Got a interrupt signal. Exiting.
clean handler called
Removing route entry for 224.0.251.133
Vif bits : 0x00000001
Setting TTL for Vif 0 to 1
Removing MFC: 217.166.225.133 -> 224.0.251.133, InpVIf: 1
Leaving group 224.0.251.133 upstream on IF address 10.238.56.39
Leaving group 224.0.251.133 on interface igc1.4
All routes removed. Routing table is empty.
Shutdown complete....
[23.01-BETA][admin@pfSense.high.local]/root:

              When looking into the original provider modem you see that the igmp member reports (router asking clients) are answered directly. With pfSense 23.01beta the router is asking but never got a reply. Due to the corrupt checksum?

              5ce9fdbe-0933-4593-8b1d-bf94c70bd3d5-quYnOtWIS4xbApENsrNKMTZS.png Provider gear capture.

              PS confirmation that with the checksum checkbox configured as shown (screenshot yesterday) the pfSense packet still shows corrupt.

              471bfa42-800b-45b0-8ed8-1ff40ee3c0e5-image.png pfSense corrupt packet

              1 Reply Last reply Reply Quote 0
              • L
                lnguyen
                last edited by

                @thebear There are reports that the Intel i226-V has issues like the 1st revision of the Intel i225-V. From what I recall, it was only fully resolved with a hardware fix with Revision 3.

                https://linustechtips.com/topic/1483003-raptor-lake-motherboards-allegedly-hit-with-ethernet-controller-flaw-intel-i226-v-25gbe-has-a-connection-drop-issue-no-fix-currently/

                T 1 Reply Last reply Reply Quote 0
                • T
                  thebear @lnguyen
                  last edited by thebear

                  @lnguyen said in 23.01.b.20230106.0600 IGMP proxy stops TV stream:

                  @thebear There are reports that the Intel i226-V has issues like the 1st revision of the Intel i225-V. From what I recall, it was only fully resolved with a hardware fix with Revision 3.

                  https://linustechtips.com/topic/1483003-raptor-lake-motherboards-allegedly-hit-with-ethernet-controller-flaw-intel-i226-v-25gbe-has-a-connection-drop-issue-no-fix-currently/

                  Yeah saw that, but where is the truth and facts? All the website are copying the news and spreading rumors last week, clickbaits. My pfSense unit with 22.5 never had a single disconnect, stable as a rock.

                  And now only igmp joins are not received by the proxy. Which could be some kernel igmp snooping for example -> software ;-)

                  I'm not believing the news sites as my unicast internet is stable as a rock with 23.01 and the i-226v. Its more clickbaite news ;-)

                  Nevertheless, thanks for sharing, all pieces could help.

                  Nothing going on- > Link logs over the last uptime arround 3,5 day:

                  2023-01-22 08:49:16.956753+01:00	php-fpm	363	/rc.newwanip: rc.newwanip: Info: starting on igc1.4.
2023-01-22 08:49:15.952055+01:00	check_reload_status	401	rc.newwanip starting igc1.4
2023-01-22 08:49:14.525924+01:00	check_reload_status	401	Linkup starting igc1.6
2023-01-22 08:49:14.520114+01:00	check_reload_status	401	Linkup starting igc1.4
2023-01-22 08:49:14.514628+01:00	kernel	-	igc1.6: link state changed to UP
2023-01-22 08:49:14.514596+01:00	kernel	-	igc1.4: link state changed to UP
2023-01-22 08:49:14.514537+01:00	kernel	-	igc1: link state changed to UP
2023-01-22 08:49:14.514245+01:00	check_reload_status	401	Linkup starting igc1
2023-01-22 08:48:59.918274+01:00	check_reload_status	401	Linkup starting igc1.6
2023-01-22 08:48:59.916272+01:00	check_reload_status	401	Linkup starting igc1.4
                  1 Reply Last reply Reply Quote 2
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Yeah this seems very unlikely to be hardware given it was working fine in 22.05.

                    I could believe the updated driver is doing something to mangle the igmp packets though.

                    Check the enabled options in the NIC with ifconfig -vvvm igc0. Perhaps it's not correctly disabling checksum offload. Or maybe some new option is present in 23.01 that wasn't in 22.05 at all.

                    For example the 8200 i226 NICs:

                    [22.05.1-RELEASE][root@8200-2.stevew.lan]/root: pciconf -lv igc0
igc0@pci0:4:0:0:        class=0x020000 card=0x00008086 chip=0x125c8086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = network
    subclass   = ethernet
[22.05.1-RELEASE][root@8200-2.stevew.lan]/root: ifconfig -vvvm igc0
igc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=e120bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6>
        capabilities=f53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,NETMAP,RXCSUM_IPV6,TXCSUM_IPV6>
        ether 90:ec:77:47:5c:e8
        inet6 fe80::92ec:77ff:fe47:5ce8%igc0 prefixlen 64 scopeid 0x1
        inet6 fe80::1:1%igc0 prefixlen 64 scopeid 0x1
        inet 192.168.92.1 netmask 0xffffff00 broadcast 192.168.92.255
        media: Ethernet autoselect
        status: no carrier
        supported media:
                media autoselect
                media 2500Base-T
                media 1000baseT
                media 1000baseT mediaopt full-duplex
                media 100baseTX mediaopt full-duplex
                media 100baseTX
                media 10baseT/UTP mediaopt full-duplex
                media 10baseT/UTP
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

                    Steve

                    T 1 Reply Last reply Reply Quote 0
                    • T
                      thebear @stephenw10
                      last edited by thebear

                      @stephenw10 said in 23.01.b.20230106.0600 IGMP proxy stops TV stream:

                      Yeah this seems very unlikely to be hardware given it was working fine in 22.05.

                      I could believe the updated driver is doing something to mangle the igmp packets though.

                      Check the enabled options in the NIC with ifconfig -vvvm igc0. Perhaps it's not correctly disabling checksum offload. Or maybe some new option is present in 23.01 that wasn't in 22.05 at all.

                      Morning @stephenw10 below the output and some screenshots from a diff tool. They do diff, could you see some issues?

                      [23.01-BETA][admin@pfSense.high.local]/root: pciconf -lv igc0
igc0@pci0:2:0:0:        class=0x020000 rev=0x04 hdr=0x00 vendor=0x8086 device=0x125c subvendor=0x8086 subdevice=0x0000
    vendor     = 'Intel Corporation'
    class      = network
    subclass   = ethernet
[23.01-BETA][admin@pfSense.high.local]/root: ifconfig -vvvm igc0
igc0: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: Server
        options=48020b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,NOMAP>
        capabilities=4f43fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWTSO,NETMAP,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
        ether 7c:2b:e1:13:7a:db
        inet6 fe80::7e2b:e1ff:fe13:7adb%igc0 prefixlen 64 scopeid 0x1
        inet6 fe80::1:1%igc0 prefixlen 64 scopeid 0x1
        inet6 2a02:a<bla> prefixlen 64
        inet 172.16.1.1 netmask 0xffffff00 broadcast 172.16.1.255
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
        supported media:
                media autoselect
                media 2500Base-T
                media 1000baseT
                media 1000baseT mediaopt full-duplex
                media 100baseTX mediaopt full-duplex
                media 100baseTX
                media 10baseT/UTP mediaopt full-duplex
                media 10baseT/UTP
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
[23.01-BETA][admin@pfSense.high.local]/root:

                      ce728436-909c-4a95-92d5-ce302a31755d-image.png

                      2ae99e90-7638-497b-b90c-4e63de72b541-image.png

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Ok, so we can see that, interestingly, the VLAN hardware filtering capability has been removed. And it was previously in use but I don't think you are using VLANs?

                        The NOMAP (unmapped mbufs) capability has been added and is enabled by default. I don't believe that would affect only multicast traffic. And it appears to be a transmit option.

                        Are you able to test using a different interface?

                        T 1 Reply Last reply Reply Quote 0
                        • T
                          thebear @stephenw10
                          last edited by

                          @stephenw10 said in 23.01.b.20230106.0600 IGMP proxy stops TV stream:

                          Ok, so we can see that, interestingly, the VLAN hardware filtering capability has been removed. And it was previously in use but I don't think you are using VLANs?

                          The NOMAP (unmapped mbufs) capability has been added and is enabled by default. I don't believe that would affect only multicast traffic. And it appears to be a transmit option.

                          Are you able to test using a different interface?

                          The diff had made against YOUR output let me clarify that ;-) Yes using a hand-full VLAN's on LAN and two on WAN.

                          Would you be able to elaborate more on the NOMAP?

                          Do you mean another interface on the same board, like from igc0 to igc2? Or put in another interface board, the last option is impossible as it is a fixed housing+NIC's.

                          T 1 Reply Last reply Reply Quote 0
                          • T
                            thebear @thebear
                            last edited by

                            The thing is that its not quite easy to rollback tot 22.05 to test the previous interface output or IGMP packet capture.

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              The nomap capability should be easy to disable but it appears ifconfig may not have caught up yet. I can't find a syntax that works. But I doubt that would make any difference here.

                              I also compared the options between 22.05 and 23.01 from the same config in the 8200 and saw the same.

                              If it's a ZFS install you should be ble to roll back the BE snapshot.

                              T 1 Reply Last reply Reply Quote 0
                              • T
                                thebear @stephenw10
                                last edited by

                                @stephenw10 23.01.r.20230202.0019 same results with the RC build ;(

                                T 1 Reply Last reply Reply Quote 0
                                • T
                                  thebear @thebear
                                  last edited by

                                  @stephenw10 could this IGMP issue be added to the list of issues?https://redmine.pfsense.org/projects/pfsense/issues?query_id=186

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    If an IGMPproxy bug report can be opened then it can be added to that list.

                                    Were you able to confirm that the queries from the proxy are generated with a correct checksum in 22.05?

                                    If so I'd go ahead and open a bug report for it.

                                    Do you see the bad checksum on all IGMP packets generated by the proxy? Upstream and downstream?

                                    T 1 Reply Last reply Reply Quote 0
                                    • T
                                      thebear @stephenw10
                                      last edited by

                                      @stephenw10 said in 23.01.b.20230106.0600 IGMP proxy stops TV stream:

                                      If an IGMPproxy bug report can be opened then it can be added to that list.

                                      Were you able to confirm that the queries from the proxy are generated with a correct checksum in 22.05?

                                      If so I'd go ahead and open a bug report for it.

                                      Do you see the bad checksum on all IGMP packets generated by the proxy? Upstream and downstream?

                                      Hi steve, the thing is that the config is changing a lot. My 22.05 backup is too old. And the 226v NIC is not supported yet so a fresh 22.05 installation is consuming quite a lot time.

                                      My action plan:
                                      -fresh install of final 23.01 usb installer image. Test with just a clean install, configure the IPTV_WAN/LAN and IGMP.
                                      -If that works, load the backup file, check again.
                                      -If both not work I'll install 2.7 and try to upgrade to 22.05, well in fact that's a downgrade. My only option left is a fresh install with an USB NIC from 2.6.0?

                                      I'll capture the WAN traffic to check the checksum.

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        You don't have a 22.05 ZFS BE snapshot you can roll back to?

                                        T 1 Reply Last reply Reply Quote 0
                                        • T
                                          thebear @stephenw10
                                          last edited by thebear

                                          @stephenw10 said in 23.01.b.20230106.0600 IGMP proxy stops TV stream:

                                          You don't have a 22.05 ZFS BE snapshot you can roll back to?

                                          You mentioned that before. I got not clue how to do that. Tested some CLI commands, never found the power to press enter.

                                          If there is some more explanation or a how to documented?

                                          EDIT: BE seems to be Boot Environment? Interesting, I was on the wrong path with the CLI commands.

                                          f1f2e6f8-8b29-492a-a70c-4ad7e5935a6b-image.png

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by stephenw10

                                            Well you can do it from the CLI using bectl but it's much easier using the GUI. 😉

                                            See: https://docs.netgate.com/pfsense/en/latest/backup/zfsbe/gui.html

                                            Also note that you cannot roll back to a 22.01 snapshot BE. It will fail to boot. The compatibility was added in 22.05.

                                            T 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post