unable to access ips on vlan after changing Gateway/dns
-
ive never changed dhcp... so i looked at the arp table.. i guess it is 1200 seconds for static ips and dhcp leases... i never set the 1200 seconds thats the default from when i just set it up i dont even know how you change lease time
all i know is all dhcp and static ips says "Expires in 1195 seconds" is the hightest one i seen so i guessing it defaults at 1200seconds
as for the version i have im running 2.6.0-release amd64 freebsd 12.3-stable
and under dchp leases i have same as you minus the two plus's
so heres my moms dhcp lease under dhcp leases no ++and how do i inscrease the dhcp lease time for lans and vlans then from 1200 seconds default to whatever?
ill check the defaul least time from ur post i just seen ur reply as i replied
-
@comet424 arp is different than dhcp lease time, they don't have anything to do with each other.. I believe the arp cache timeout in pfsense is like 20 minutes.. 1200 seconds.
edit:
yeah that doesn't look right - did you try with a different browser, are you using anything in browser that might block those?
-
@johnpoz ah ok
and my default least time is set blank so guessing thats 7200 seconds
learn something new everyday.. i thought the arp table the expires seconds was the dhcp leases counting down..and ya i dont
have any the 4 icons you got
the 2+ a power button and trashcanhere is a start i know its static ip but doesnt show more... i tried 2 computers and both running Edge and Chrome nothing showing up... Trash cans show up on ARP Table if that helps
-
is there a setting like a toggle switch that enables and disables the ++power button and trashcan?
-
@comet424 static leases (reservations) wouldn't have any of those icons. But something that just got a normal dhcp lease should show them.
Do you have a scroll bar at the bottom - maybe the size of screen or whatever is its just not showing it
-
@johnpoz ah ok
then not working right then as none of the dhcp leases have ++ power icon and trashcanis the power icon for wake up lan?
what i notice too some of the dhcp leases they say they offline but the really online so whats weird
-
@comet424 I think there is some change coming with that.. Yeah these can show offline if they haven't talk to pfsense in a while - and the arp cache has expired..
Only way if pfsense knows if a client is actually online is if it has it in its arp cache. So if the device hasn't need to send any traffic to pfsense in a while, then for all pfsense knows the device is offline.
something is up with yoru display - your statics should at least havve the little pen/pencil thing for editing
-
@johnpoz ah there is is...
thats werid screen is big enough the display area doesnt
so here screen capture of my browswer... so my browswer wide enough the frame is not expanding
-
@comet424 weird - so some sort of browser issue take it then.
So you did have the scroll bar at the bottom then.
edit: do you have hostname or description with long names - that seems to throw off the window sizing.. I have this roomba that name is really long - and think that is throwing mine off a bit, going to set it so that name is shorter and see if that clears mine up and gets rid of the scroll bar at the bottom.
-
@johnpoz
ya now i tested it on the 2 comps and 2 browsers... it seems pfsense is set frame work
is there anyway to make it expand here is screen shot of my browers shouldnt it expand it if it need to or is it ment to be centered and a fix width to display? a way that it resizes ot the widest part like a excel cell you can resize it to the biggest lines is it possible is it a setting or is it fixed and something i need to look for in future i didnt relase i had to do
-
i do have some long names but shouldnt the outside frame resize it by adding up all the cells and resizing?
-
@comet424 have never looked into it much - but sure there is a way to edit the css or something to be able to take up more of the browser width, etc.
I am going to change the name of my roomba see if that clears up the small amount of cutoff I am seeing. She is cleaning at the moment so when she finishes going to set the name to beata vs that long as name ;) That is what we call her, inside joke ;)
-
@johnpoz ah ok i appreciate it.. ya must be a css thing as if i have the Status/Dashboard page it takes up the full width of the browser... if its a css maybe it can be added to the next release of pfsense
i know the real experts of pfsense dont even notice they so experts u guys know
but for someone else i didnt even think of scrolling as when you have full blown screen u think you should be able to see
sorry if my disylexia gets best of me .. sounds good in my head.. doesnt always come out the same way
-
forgot to add you wanted to know where i learned about the + button i read it from google search
https://www.oreilly.com/library/view/pfsense-2-cookbook/9781849514866/ch02s03.htmlas i didnt even know about the ++power icon and trashcan before this... as i would copy and past the mac address from the arp table and then make a static ip for some of my devices.... so never even knew about it till i read that artitcle earlier.. so thats why i thought maybe it got removed but didnt realise i had to scroll the box
-
@comet424 didn't want to know where you learned about it - wanted to know where you specifically looking
So I changed couple of clients that were having really long names, my directv box and my irobot, now my scroll bar is gone on the bottom and not seeing any sort of cut off on the buttons.
-
@johnpoz
ah okand ok... so shorter names will fit in the box... but longer make ya scroll
so then its css maybe it can be requested css auto size like status/dashboard takes up the full page.. least for us not so advanced but above dumb as a rock level ( in the future release of pfsense... just a suggestion
and now you mentioning you have a robot to vacum.. i feel i need one lol.. on my list of things i could use... i need a Beta romba lol (: one less job for me to do lol
learn something new everday... saves me from doing Mac Address Copy and paste
-
@comet424 Beata, not beta ;)
I am sucker for techy toys.. My wife had gotten one for xmas a few years back - but it was a low end off brand model that just bounced around with no mapping or location info, etc.. It would always get tangled up with stuff on the floor - it use to love to suck up shoelaces hanging off shoes, etc.
Only way you could keep it from going somewhere was magnetic tape on the floor, etc.
So I somewhat recently updated to a irobot j7 model, has full mapping and camera function - so draws out a full map of your house, and you can just mark on the map where you don't want it to go, or you can set areas so I can tell it to go clean the guestroom or kitchen for example via alexa.. And hasn't gotten stuck on anything, hasn't sucked up any shoe laces.. Now it doesn't go under the couch that the old one use to always get stuck under (marked under the couch as no go zone on the map)..
If it runs into stuff while its working that it is not sure off - get a review with pictures in the app on my phone asking is this a temporary obstacle or perm, etc after its done. So it can adjust its mapping.. Other then the bin getting full, it loves to suck up fiber from the carpets that fill up the bin quickly. Other than pretty happy with it. And vs just bumping around it actually cleans an area with a pattern so it doesn't miss any spots, etc.
If it hasn't finished the job, and gets low on charge its smart enough to go to its little charging base, and then continue where it left off when it gets enough juice.. I should of gotten the one were it can empty itself in the charging base when it gets full - but its pretty tall base and from what reading sounds like a jet taking off when its empty itself - and had no where to hide such a base. Its current base fits under the tv stand, so it goes home and you can not even see it, etc.
Like a said I am a sucker for techy stuff ;) the mapping feature is pretty freaking slick to be honest.. Now if I could just get to get me a cold beer ;) hehehe
-
@johnpoz lol thats pretty sweet.. well in the 80s we had toys r us selling that robot tht would goto the fridge and bring you a drink was that white robot... always wanted that as a kid lol...
what you need also is irobot if the kids dont pick up there toys and you tell them to pick it up... the robot sucks it up and shreds it like a paper shredder... and you tell the kids well you should have listened..
or you need battle bot.. like Tombstone that cleans... it trashs everything and then boom u need more tech stuff lol (: although everytime it cleans up its gonna get expensive but you wanted a new couch and bed anyways lol
id like to get those outdoor irbot style lawn mowers.. but my property too big on a farm.. to cut.. and too expensive i could use like 5 or 6 lol then no need to mow the lawn the robot can
-
@comet424 there was someone on here that had one of those lawn mower robots.. Yeah looked slick as hell - would love to get one. But doing the math - just not cost effective.. Have to see if I can find that old thread, but the roi was going to be like years compared to what I currently pay the landscapers to do ;)
edit: here is that thread where the lawn mower robot came up
-
oh thats pretty cool...ya i see canadian tire sells them 2000 for one lol frig.. and it be dead trying to mow part of my lawn lol
i looked into converting a riding mower to be anotomos but people havent gotten them perfect yet.... but be nice... sit back and let the riding mowers do it..
and for 2k i might as well buy a riding mower.. these things i cant hook up a trailer on the box of these... if i won the lottery and 2k was like a penny then i wouldnt care lol
