unable to access ips on vlan after changing Gateway/dns
-
@comet424 there was someone on here that had one of those lawn mower robots.. Yeah looked slick as hell - would love to get one. But doing the math - just not cost effective.. Have to see if I can find that old thread, but the roi was going to be like years compared to what I currently pay the landscapers to do ;)
edit: here is that thread where the lawn mower robot came up
-
oh thats pretty cool...ya i see canadian tire sells them 2000 for one lol frig.. and it be dead trying to mow part of my lawn lol
i looked into converting a riding mower to be anotomos but people havent gotten them perfect yet.... but be nice... sit back and let the riding mowers do it..
and for 2k i might as well buy a riding mower.. these things i cant hook up a trailer on the box of these... if i won the lottery and 2k was like a penny then i wouldnt care lol
-
question since you love tech alot you may know... i curious are there any routers that can do 2 vlans and lan say
so id like to have my LAN and IoT Devices use Wifi.. but i dont wanna buy like 2 routers.. one for LAN to do devices like cell phone or my laptops.. and then second one for for Iot that i block internet and lan...
reason is i looking to get like 3 mesh routers in my house and shop outside of the house so this way it cover things
but if i have 3 for IoT and id need 3 for my Lan devices..
so id need 6but my question is there any say router that can take in 2 Lan ports from the router one dishes out Iot Vlan section and 1 for the Lan . like a smart switchs do.. or not possible and basiclly you need 6
was just thinking as on my routes.. or is there powerful routers that can cover like 3 mesh router ranges... figured id ask since u love tech and maybe youd know
cuz what id like is
LAN IOT and Guest Network off 1 wifi router.. if possible but dunno if it can be done
-
@comet424 You won't need another router, just a switch (or more) that can handle the amount of devices you have.
I had, upgraded the machine with more physical interfaces, 5 vlans on my pfSense. Some people have double that.
As long as you have a vlan capable switch, you're good. -
@jarhead ^ exactly all that is needed is at least 1 interface on pfsense and vlan capable switch and you can create as many vlans as you want.
If you want to do multiple vlans on wifi networks - best to get a AP that is capable off that, some wifi routers you can run 3rd party firmware on and do it. dd-wrt or openwrt supports vlans as long as the hardware of the wifi router does. Or just buy AP that support - unifi APs are pretty popular around here. I have 3 of them - they work great.
-
@johnpoz ah ok so a unifi router can support like multiple vlans
like the mitok switch i have does support vlans... and now i wanna have a wifi for lan devices like cell phones or my laptops that arent hard wired... and another wifi for the IoT devices the way i been doing it is where i use the 192.168.0.1-254 range ad segmented a section to do iot and lan and dmz say..
so would you then then Trunk from the smart switch to the AP Unifi router ap and then it knows which devices... like do you setup a seperate Wifi login password for each vlan?
and which unifi ap is good one.. i have heard of them i dunnohow to use them as i did watch a video years ago they hard to use etc...
-
and whats better then unifi or the ddwrt and if you look on amazon .ca can u tell me which router or AP ud recommend that would work as i havent kept up in routers for years if it last me 10 yrs i ok with them so i dont upgrade often anymore
-
@comet424 said in unable to access ips on vlan after changing Gateway/dns:
ike do you setup a seperate Wifi login password for each vlan?
Yeah you normally setup different ssids for the different vlans - but you could get fancy and do dynamic vlans after an auth to say radius..
-
@johnpoz ah ok cool so your not limied to just 1 like on the asus or dlink or tplink ones i have
i did try looking up the unif but didnt see where you can do multiple vlans
do all the unif allow this? and whats better dwrt or unif? -
@comet424 said in unable to access ips on vlan after changing Gateway/dns:
i did try looking up the unif but didnt see where you can do multiple vlans
Did you look at the summary page for say the U6-lite, one of their popular models currently
https://store.ui.com/collections/unifi-network-wireless/products/u6-lite-us
BSSID 8 per radio
VLAN 802.1QI am not aware of any of their models that don't support vlans.. I have 3 different models of their older wifi 5 models, the pro, the lite and the LR.. And before that I had one of their first models that all supported multiple vlans. I currently have 4 different SSIDs running on mine, all on different vlans.
As to what is better dd-wrt, I would say the unifi are true APs.. the dd-wrt is 3rd party firmware to run on soho wifi routers. While it can vastly improve the feature set over native firmware. Your still at the mercy of the hardware, not saying some soho hardware is not fine. But unifi AP are designed to be actual AP.. they are all powered by poe, so you can proper mount them where a AP belongs, etc.. I would never ever go back to running soho wifi routers as my wifi APs..
-
@johnpoz
hi john i finally got a AP i picked up a tplink ep650 model i got it from a re-store habitat for humanity store for like 40 bucks... so i didnt go the unifi route yet.. only cuz i found it there.. i got it to work in pfsense i set up 3 wifis but i having a trouble i dunno if its a firewall rule or not .. i can not get my home assistant to detect things like my cameras or wifiso how i have it set up is
in my attic
i have pfsense routher ----> managed switch ----> poe switch (Vlan10) for 5 Poe Cameras
and that worksnow from the
managed switched (mikotek)----> my linksys/cisco managed switch in another room...cisco/switch i set up 2 Vlans
Vlan 10 - For Cameras
Vlan 20 - For IoT devices
i set up the tagged, trunk port from managed switch to linksys/cisco managed
and then i ran 2 cables into my unraid box where it hosts Home Assistantand i set that all up
so Home assitant gets 3 ips
192.168.0.x for regular setup
192.168.10.x for the Cameras
192.168.20.x for the IoTnow i figured when all that was setup Home Assistant would see it all but it doesnt.. is there a fire wall rule or something or it cant be done... and you need to run a wire to like the camera switch and some how to the IoT
and for testing purposes i added fire wall rules on Camera Lan and Iot at the top that by passes the vpn on lan that they all **** stars so it opens up fully and home assistant still cant see the Iots Automaticllty or Cameras.. but it can if i manually add things by Ip address
what i doing wrong?
-
forgot to add
managed switch(in attic) to to the Tplink For Wifi Vlan20 that part works
-
@comet424 Why are you giving HA 3 IP's?
You have vlans setup, use them. Put HA on the IoT vlan only. Then set rules to access anything it needs to on the other vlans. -
well orginally i had 1
192.168.0.x as Home Assistant runs as a VM under unraid....... and access my network
and i had swapped out this 4 port card from my pfsense as i ehard from others instead of vlans they used individual ports for HA
so then i set up Vlan Cameras and Vlan IoT
and i have rules set to be open but still nothing so if i change to 1 port for HA on IoT then Ha going to see all the ips on Iot Cameras and lan then automaticlly?
cuz i figured it should have detected so far but doesnt
so for now i by pass my rules and just opened it up
-
@comet424 You're only allowing TCP, change it to any,
and i have rules set to be open but still nothing
What does that mean? What have you been trying to do? If just pinging, then that wouldn't work since you've been blocking ping.
-
@jarhead open it up as means
Source *
Port *
Destination *
Port *
Gateway *means it has no restrictions above any of my other rules like port 123
is what i meant to say.. sorry my disylexia gets best of me...so you can see Lan Camera Iot Devices have 0 restrictions now.. and still HA cant detect anything on the IoT or Cameras
also forgot i have a 3rd Location as the Attic is my Shop on my property..
but ya still unable to get HA to see the IoT Devices and Cameras just anything on LAN is the only thing it can detect
-
like is there other rules i need to get the HA to see it.. how come it can see things on LAN but not Camera or IoT Devices.. do i need to add something under NAT?
oh i tried PING in terminal of HA
i can ping 192.168.0.1
but i cant ping
192.168.10.1
192.168.20.1so i must still need something else right?
-
@comet424 Again, you're only allowing TCP, pings are, and are supposed to be, blocked by your rules.
Change the protocol to IPv4* -
@jarhead oh ok my bad as with my dislexia i read it as just ip4 i had set..
ill try that and see if it detects.. thanks for help so far i appreciate it
-
so i can ping now
192.168.10.1 and 192.168.20.1but i cant ping hostnames under the arp table..
so i have a camera called "cam1" like 192.168.10.21 i can ping the ip not the name
and HA still cant detect iot devices or cameras.. just whats on LAN network.. i made sure to change the TCP to *
