Automatic gateway not updating after default deleted

virtual-frog

At System/Routing/Gateways in the web UI, I created a new gateway and set it to be the default gateway. It was not working so I deleted it and returned the "Default gateway IPv4" field to the "Automatic" setting. After hours of frustration I realized this "Automatic" setting had not switched back to the original gateway (received via DHCP). The original gateway was online according to the Status/Gateways page, but was not the default and thus no default route was defined. Manually resetting the default ipv4 gateway solved the problem.

I am on pfSense 2.6.0-RELEASE. I do have ipv6 enabled so there are two gateways on Status/Gateways, one for ipv4 and one for v6 (there should be a default gateway for each).

I found this somewhat similar issue, but mine seems to be more related to config saving/parsing. While attempting to replicate the issue with the ipv6 gateway I found that even worse, I could not change the default gateway back manually. All my configuration is done in the web UI but I will show how the config file gets messed up.

Default configuration:

<gateways>
        <defaultgw4>WANGW</defaultgw4>
        <defaultgw6>WANGWv6</defaultgw6>
</gateways>

Added a new default gateway and disabled the original:

<gateways>
        <defaultgw4></defaultgw4>
        <defaultgw6></defaultgw6>
        <gateway_item>
                <interface>wan</interface>
                <gateway>dynamic</gateway>
                <name>WAN_DHCP6</name>
                <weight>1</weight>
                <ipprotocol>inet6</ipprotocol>
                <descr><![CDATA[Interface WAN_DHCP6Gateway]]></descr>
                <disabled></disabled>
        </gateway_item>
        <gateway_item>
                <interface>wan</interface>
                <gateway>**garbage ipv6**</gateway>
                <name>test6</name>
                <weight>1</weight>
                <ipprotocol>inet6</ipprotocol>
                <descr></descr>
        </gateway_item>
</gateways>

Removed the new gateway and manually restored the default gateway:

<gateways>
        <defaultgw4></defaultgw4>
        <defaultgw6></defaultgw6>
        <gateway_item>
                <interface>wan</interface>
                <gateway>dynamic</gateway>
                <name>WAN_DHCP6</name>
                <weight>1</weight>
                <ipprotocol>inet6</ipprotocol>
                <descr><![CDATA[Interface WAN_DHCP6 Gateway]]></descr>
        </gateway_item>
</gateways>

But now the web UI does not show wan_dhcp6 as a default gateway!

I am not very experienced with pfsense so I am posting here to make sure it is not a known issue. If this is new I will file a bug report.