Verizon 5G Home Internet
-
Hey there. I had COX internet with IPv6 working fine.
I switched to Verizon 5G Home Internet, and can't seem to get IPv6 working with pfSense. I have a XCI55AX gateway. I set it up for Bridge mode with IP Passthrough enabled. IPv4 is working fine.
The problem I'm facing is IPv6 obtains address from WAN side. However, it's a /64 subnet and LAN side doesn't get an IPv6 address with Trace enabled.
I'm curious if anyone has this setup and if they have gotten it to work or not.
-
WAN Side:
IPv6 Configuration Type: DHCP6
Request only an IPv6 prefix: Checked
DHCPv6 Prefix Delegation size: 56
Send IPv6 prefix hint: Checked -
LAN Side:
IPv6 Configuration Type: Track Interface
IPv6 Interface: WAN
IPv6 Prefix ID: 0
Any ideas to try?
-
-
Do they provide prefixes such as /56? My cell provider doesn't over the cell network, but they do over the cable network.
-
@jknott
I don't think they do. It's only getting a /64 address :( So, do I have any options to get IPv6 address working? Can you NAT IPv6 so I can port forward with it? -
I have never set up NAT on IPv6. No need for it here.
