Will this UPS unit work well?
-
Hey everyone,
For personal use, i have a UPS sitting in my basement that i have the home network connected to.Link is here Cyberpower
For those who dont want to click the link: CYBERPOW 1500VAGAMEUPS PFC/LCD/AVR
So question is, can I use NUT for this?
Additionally, looks like i may need a USB Type A port which i would need to dig up but is there any issue here before i purchase some usb cables? -
I use the same UPS and it works fine with NUT.
-
@jeff3820 wow talk about good timing...I got my USB cable plugged in on the back of the unit and connected to the pfsense. Not working for me so far.
Status Alert: The UPS requires attention
/usr/local/etc/rc.d: usbconfig ugen0.1: <Intel XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen0.2: <CPS GX1500U> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (2mA)
-
Resolved...Had to reboot the PFsense. Yikes..
-
-
@dem Aaaannnndddd its back to not working.
-
@michmoor My CyberPower has been stable with the NUT workaround from the thread I referred to previously.